mb-320 exam Microsoft

[July-2021] Get Pass4itSure (Microsoft MB-320) Exam Dumps As Practice Test And PDF

Pass4itSure Microsoft MB-320 exam dumps are designed with the help of Microsoft’s real exam content. You can get MB-320 VCE dumps and MB-320 PDF dumps from Pass4itSure! Check out the best and updated MB-320 exam questions by Pass4itSure MB-320 dumps https://www.pass4itsure.com/mb-320.html (Q&As: 142) (VCE and PDF), we are very confident that you will be successful on the Microsoft MB-320 exam.

Microsoft MB-320 exam questions in PDF file

Download those Pass4itSure MB-320 pdf from Google Drive:

Microsoft Role-based Certifications

AI-102 Exam: Designing and Implementing a Microsoft Azure AI Solution (beta)

Free AI-102 Exam Questions Answers
https://www.microsoft-technet.com/get-pass4itsure-microsoft-ai-102-exam-dumps-as-practice-test-and-pdf.html

AZ-600 Exam: Configuring and Operating a Hybrid Cloud with Microsoft Azure Stack Hub

Free AZ-600 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-az-600-exam-dumps-as-practice-test-and-pdf.html

DP-300 Exam: Administering Relational Databases on Microsoft Azure

Free DP-300 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-dp-300-exam-dumps-as-practice-test-and-pdf.html

MB-220 Exam: Microsoft Dynamics 365 Marketing

Free MB-220 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-220-exam-dumps-as-practice-test-and-pdf.html

MB-230 Exam: Microsoft Dynamics 365 Customer Service

Free MB-230 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-230-exam-dumps-as-practice-test-and-pdf.html

MB-240: Microsoft Dynamics 365 Field Service

Free MB-240 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-240-exam-dumps-as-practice-test-and-pdf.html

MB-310: Microsoft Dynamics 365 Finance

Free MB-310 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-310-exam-dumps-as-practice-test-and-pdf.html

Following are some Microsoft MB-320 exam questions for review (Microsoft practice test 1-13)

QUESTION 1
A company produces paints and assembles bicycle frames.
You must account for paint drying time before assembly operations can begin. You need to set up the operation to
encompass queue times.
Which two options can you use? Each correct answer presents part of solution.
NOTE: Each correct selection is worth one point.
A. Enter a value in the queue time after field for the painting operation
B. Make a resource group for each size and color and assign that group to the operation
C. Enter a value in the transit time on the painting operation
D. Enter a value in the queue time before field for the assembly operation
E. Build capabilities for each resource related to color
Correct Answer: AD


QUESTION 2
You need to set up the state control for sales of motorcycles.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Create an inclusive restricted product list for United States. Do not add the motorcycle part to the list.
B. Create an inclusive restricted product list for United States and add the motorcycle part to the list.
C. Create an exclusive restricted product list for California and add the motorcycle part to the list.
D. Create an exclusive restricted product list for Missouri and add the motorcycle part to the list.
Correct Answer: BC
https://stoneridgesoftware.com/working-with-restricted-products-in-dynamics-365-operations/

QUESTION 3
You are the lead product design engineer at a plastics manufacturing company. You implement a new process that uses
a single tool to produce three finished goods at the same time.
You need to set up the planning item number and formula to correctly to manufacture the three items.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Create item number for planning item and the associated formula
B. Add minimum and maximum quantities on formula
C. Add a coverage group to the formula
D. Assign co-products to the formula
E. Specify each of the finished good items as co-products
Correct Answer: ADE

QUESTION 4
A company plans to implement Dynamics 365 for Finance and Operations.
You need to determine which manufacturing solutions to use.
Which manufacturing solution should you use? To answer, drag the appropriate setting to the correct drop targets. Each
source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to
view content.
NOTE: Each correct selection is worth one point.
Select and Place:

MB-320 exam questions-q4

Correct Answer:

MB-320 exam questions-q4-2

QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
A company implements Dynamics 365 for Finance and Operations for their Lean manufacturing environment.
There has been an engineering change to a fixed quantity product that is in production. This change will add an
additional processing step as the second step. The existing version must be phased out and replaced by the new
version.
You need to ensure that the engineering change takes affect at the end of the month.
Solution:
1.
Edit the existing production flow and set the expiration date to the end of the month.
2.
Using the existing production flow, create a production flow and version. Set the expiration date to the end of the month.
Create an activity for the new process step and add it in the proper sequence.
3.
Create a Kanban rule that uses the last day of the month as the effective date.
4.
Edit the existing Kanban rule. Set the expiration date to the end of the month. Set the new Kanban rule as the
replacement Kanban rule.
5.
Activate the new production flow. Does the solution meet the goal?
A. Yes
B. No
Correct Answer: A

QUESTION 6
HOTSPOT
You need to resolve the shop supervisor\\’s issue.
Which options should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

MB-320 exam questions-q6

Correct Answer:

MB-320 exam questions-q6

QUESTION 7
SIMULATION
You are a functional consultant for Contoso Entertainment System USA.
You need to configure the system to ensure that the production release to warehouse process either performed
manually or via batch.
To complete this task, sign in to Dynamics 365 portal.
Correct Answer:
Navigate to Production control > Setup > Production parameters.
Configure the Production line release parameter to Release BOM and formula lines via a batch job or as a manual
interaction.

QUESTION 8
You need to configure costing for raw materials used to manufacture unscented cleaning solution. Which form should
you use?
Case Study Title (Case Study):
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to
complete each case. However, there may be additional case studies and sections on this exam. You must manage your
time to
ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case
study. Case studies might contain exhibits and other resources that provide more information about the scenario that is
described in the case study. Each question is
independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make
changes before you move to the next section of the exam. After you begin a new section, you cannot return to this
section.
To start the case study
To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the
content of the case study before you answer the questions. Clicking these buttons displays information such as
business
requirements, existing environment, and problem statements.
If the case study has an All Information tab, note that the information displayed is identical to the information displayed
on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Current environment Products manufactured
Cleaning equipment
1.
– floor cleaner
2.
– pressure washers
3.
– scrubbers
4.
– vacuums
Liquid cleaning solutions
1.
– No scent
2.
– Orange scent (subcontracted to a vendor named VendorA)
3.
– Pine scent (subcontracted to a vendor named VendorA)
The production quantity for the finished unscented liquid cleaning solution is 40-liters. IngredientC for unscented liquid
cleaning solution is stored in inventory in 50-liter barrels and allocated in 50-liter increments. Two barrels of IngredientC
are used to produce a barrel of unscented liquid cleaning solution.
Production sites
The Eastern United States facility manufactures equipment.
The Western United States facility manufactures liquid cleaning solutions.
Raw materials and finished products are stocked at the warehouse and distributed from the warehouse.
Warehouse facilities
The warehouse consists of the following zones:

MB-320 exam questions-q8

RequirementsCleaning equipment manufacturing
You identify the following requirements for manufacturing cleaning equipment:
1.
Production is Make to Stock and must be scheduled at an operational level.
2.
Machine equipment is produced on an assembly line. Scheduling must be based on production orders.
3.
Finished products must be packaged and shipped directly from the warehouse.
4.
To reduce delivery times and excess inventory, equipment must be produced as needed.
5.
The ability to schedule production must be based on resource capacity and the availability of required material.
6.
Production order operations must be scheduled to start only when capacity and materials are available at the same time
and in the required quantities.
Liquid cleaning solution manufacturing
Latest MB-320 Dumps | MB-320 VCE Dumps | MB-320 Study Guide 8 / 17https://www.pass4itsure.com/mb-320.html
2021 Latest pass4itsure MB-320 PDF and VCE dumps Download
1.
Production is Make to Order and is scheduled at the job level Products must be manufactured in batches.
2.
Finished products must be packaged and shipped directly from the warehouse.
3.
You must be able to calculate the estimated consumption of ingredients and ensure that the amount is divisible by the
number of units the raw material is available.
4.
Formula changes must be reviewed and approved. You must ensure that approved formulas cannot be deleted or
edited. Approved formulas may be deactivated.
5.
An ingredient used to manufacture unscented cleaning solution is defined as a restricted product.
6.
You must be able to automatically print a product safety data sheet (PSDS) with the packing slip for any order that
includes unscented cleaning solution.
7.
Production must be schedule to start by date and time according to the order that is specified by the production route.
You must implement a scheduled Kanban rule that meets the following requirements:
1.
Prevent overloading a work cell for scheduled Kanbans.
2.
Visualize excess inventory in a supermarket.
3.
Store products in supermarkets before they are consumed or shipped.
4.
You must link relevant financial dimension data to the inventory transactions at each site to ensure that you can trace
profit and loss figures directly to East site and West site respectively.
5.
You must set up production operations for sub-contracting of Pine scent and Orange scent solution to VendorA to
ensure that a purchase order is automatically created base on estimation of a production order.
Costing
1.
The price of raw materials used for manufacturing unscented cleaning solution must be tracked based upon commodity
exchange pricing. The margin and cost multiplier must be set up for commodity traded raw material.
2.
You must set up cost calculation groups to ensure that indirect costs that originate in the manufacturing of finished
goods are recognized and absorbed into the product cost.
3.
The production manager needs to set up picking list journals and BOM item consumption.
Reporting
1.
Production control parameters must be setup for reporting of automatic BOM and Route consumption.
2.
You must create reports that include information about cost records and categories for items, and calculation formulas
for indirect costs.
3.
You must treat manufactured items as purchased items for cost roll-up purposes during BOM calculations and
reporting.
4.
You must configure automatic route consumption in connection with the automatic running of Report as finished.
Inventory control
You must not be required to track the lot number for items when you enter inventory information into the system. Lot
numbers for items must be entered when items are picked from inventory.
Issues
Users report the following issues:
1.
The production manager observes that items are being deducted from inventory two times on production jobs. A shop
supervisor mistakenly registers the process for assembling batteries for the pressure washers to Registered as
prepared. You must reschedule the process for a future date.
2.
Customer1 orders 20 barrels of unscented solution. The order is confirmed. Production must be scheduled to start on
December 21 to meet the customers delivery deadline.
3.
User2 reports that costs for manufactured items are twice as high as expected.
4.
UserD reports that the formula for the liquid cleaning solution sometimes changes during production. You must enforce
the policies regarding formula editing for current and future use.
A. Cost basis type
B. Quantity and margin template
C. Pricing calculation
D. Pricing template
Correct Answer: B
Reference: https://docs.microsoft.com/en-us/dynamicsax-2012//quantity-and-margin-templateform?redirectedfrom=MSDN

QUESTION 9
A manufacturing company is implementing Dynamics 365 for Finance and Operations. The company uses a standard
costing model to value inventory.
During the setup of the system, all areas that impact the standard cost of the item must be configured correctly to
calculate a complete standard cost by using routing, Bill of materials (BOM) and overhead burden.
You need to verify that all areas of the system are correctly configured.
Which object does NOT impact the standard cost of manufactured items?
A. item group
B. cost groups
C. cost categories
D. BOM formula
Correct Answer: D


QUESTION 10
A glass bottle manufacturer uses route operations to schedule resources and track manufacturing costs.
The company has recently seen an increase in demand and purchases another resource. The company uses the same
costs per resource. However, the new resource costs more to run. The company must be able to track cost
contributions
for the new resource.
You need to create a cost category for the new resource.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: Each correct selection is worth one point.

MB-320 exam questions-q10

QUESTION 11
A company produces lotions for pain relief and uses Dynamics 365 for Finance and Operations. You have been
provided the following information for a new relieving lotion.

MB-320 exam questions-q11

Use the drop-down menus to select the answer choice that completes each statement based on the information
presented in the graphic. NOTE: Each correct selection is worth one point.
Hot Area:

MB-320 exam questions-q11-2

QUESTION 12
A manufacturing company uses advanced warehouse management functionality for a new warehouse.
After releasing a production order, you observe that the warehouse work for raw material picking was not generated.
You need to go through the warehouse management setup to determine what is missing.
What three setup configurations must you validate? Each correct answer presents part of the solution.
NOTE; Each correct selection is worth one point.
A. Work template for raw material picking.
B. Wave template.
C. Directive codes.
D. Confirm the production output location on your resource group.
E. Location directive for raw material picking.
Correct Answer: ACE
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/warehousing/control-warehouselocationdirectives


QUESTION 13
Note: This question is part of series of questions that present the same scenario. Each question in the series contains a
unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
A company produces and distributes seafood to supermarkets. During the manufacturing process, raw seafood is
purchased, cleaned, and packaged into various-sized boxes. Each box may have a different weight.
Product is sold by the box and priced by the pound.
You need to ensure that you can perform transactions at the box level and record the net weight of goods shipped to a
customer.
Solution: Set up the product with a sales unit measure of pounds and inventory unit measure of box. Set a standard unit
conversation for the product from box to pounds.
Does the solution meet the goal?
A. Yes
B. No
Correct Answer: B

Thanks for reading! Hope the newest MB-320 exam dumps can help you in your exam. Get full MB-320 exam questions to try Pass4itSure MB-320 dumps! MB-320 dumps in VCE and PDF are here: https://www.pass4itsure.com/mb-320.html (Updated: Jul 24, 2021).

Download Pass4itSure MB-320 dumps pdf from Google Drive: https://drive.google.com/file/d/1mnXnerozPMvr5G9dC8_pAemihOKNjGHp/view?usp=sharing (MB-320 Exam Questions)