md-100 dumps md-100 exam md-100 exam questions md-100 pdf Microsoft

Free Microsoft MD-100 Windows 10 Exam Questions Pdf Quizlet

This blog, sharing how-tos, practice questions, PDFs, and more about the Microsoft MD-100 Windows 10 exam.

Has anyone done the MD-100 exam? How long did it take to study?

The MD-100 is challenging because it introduces a lot of new content. It takes months to pass it normally, learns some research, and practice.

Does anyone have any good advice on taking this Microsoft MD-100 Windows 10 exam, especially a good MD-100 dumps of learning materials and places to take practice exams?

I can’t stress enough, you definitely deserve solid MD-100 dumps >>> https://www.pass4itsure.com/md-100.html ( Pass4itSure MD-100 Dumps PDF+ VCE) Take the comprehensive MD-100 exam practice test questions to help you pass the Windows 10 exam with ease.

Microsoft MD-100 windows 10 dumps questions onine

QUESTION 1

You install Windows 10 Enterprise on a new computer.
You need to force activation on the computer.
Which command should you run?

A. slmgr /upk
B. Sec-RDLicenseConfiguration-Force
C. Sec-MsolLicense-AddLicense
D. slmgr /ato

Correct Answer: D

References: https://docs.microsoft.com/en-us/windows/deployment/volume-activation/activate-using-key-managementservice-vamt

QUESTION 2

You have 20 computers that run Windows 10.
You configure all the computers to forward all the events from all the logs to a computer named Computer1 that runs
Windows 10.

When you sign in to Computer1, you cannot see any security events from other computers. You can see all the other
forwarded events from the other computers.

You need to ensure that the security events are forwarded to Computer1.
What should you do?

A. On each computer, run wecutil ac /q.
B. On each computer, add the NETWORK SERVICE account to the Event Log Readers group.
C. On each computer, run winrm qc -q.
D. On Computer1, add the account of Computer1 to the Event Log Readers group.

Correct Answer: D

https://docs.microsoft.com/en-us/windows/security/threat-protection/use-windows-event-forwarding-to-assistin-intrusiondetection

QUESTION 3

You are a network administrator at your company.
The company uses an application that checks for network connectivity to a server by sending a ping request to the IPv6
address of the server replies, the application loads.

A user cannot open the application.
You manually send the ping request from the computer of the user and the server does not reply. You send the ping
request from your computer and the server replies. You need to ensure that the ping request works from the user\’s
computer.

Which Windows Defender firewall rule is a possible cause of the issue?

A. File and Printer Sharing (NB-Datagram-In)
B. File and Printer Sharing (Echo request ICMPv6-Out)
C. File and Printer Sharing (NB-Datagram-Out)
D. File and Printer Sharing (Echo Request ICMPv6-In)

Correct Answer: B

QUESTION 4

DRAG-DROP
You have a computer named Computer1 that runs Windows 7. Computer1 has a local user named User1 who has a
customized profile.

On Computer1, you perform a clean installation of Windows 10 without formatting the drives.
You need to migrate the settings of User1 from Windows7 to Windows 10.

Which two actions should you perform? To answer, drag the appropriate actions to the correct targets. Each action may
be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view
content.

NOTE: Each correct selection is worth one point.
Select and Place:

The User State Migration Tool (USMT) includes two tools that migrate settings and data: ScanState and LoadState.
ScanState collects information from the source computer, and LoadState applies that information to the destination
computer.

In this case, the source and destination will be the same computer.
As we have performed a clean installation of Windows 10 without formatting the drives, User1\\’s customized Windows
8.1 user profile will be located in the \Windows. old folder. Therefore, we need to run scanstate.exe on the \Windows. old folder.

User1\\’s Windows 10 profile will be in the C:\Users folder so we need to run loadstate.exe to apply the changes in the
C:\Users folder.

Reference:

https://docs.microsoft.com/en-us/windows/deployment/usmt/offline-migration-reference
https://docs.microsoft.com/en-us/windows/deployment/usmt/usmt-how-it-works
https://docs.microsoft.com/en-us/windows/deployment/usmt/usmt-common-migration-scenarios#bkmk-fourpcrefresh

QUESTION 5

HOTSPOT
You have a computer named Computer1 that runs Windows 10. Computer1 is in a workgroup. Computer1 contains the
local users are shown in the following table.

The Users group has Full control permissions to Folder1, Folder2, and Folder3.
User1 encrypts two files named File1.docx and File2.docx in Folder1 by using EFS.
Which users can move each file? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

QUESTION 6

You have a computer that runs Windows 10. You need to configure a picture password. What should you do?

A. From Control Panel, configure the User Accounts settings.
B. From the Settings app, configure the Sign-in options.
C. From the Local Group Policy Editor, configure the Account Policies settings.
D. From Windows PowerShell, run the Set-LocalUser cmdlet and specify the InputObject parameter.

Correct Answer: B

QUESTION 7

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.

You have a laptop named Computer1 that runs Windows 10.
When in range, Computer1 connects automatically to a Wi-Fi network named Wireless1.
You need to prevent Computer1 from automatically connecting to Wireless1.

Solution: From a command prompt, you run netsh WLAN delete profile name=” Wireless1″.
Does this meet the goal?

A. Yes
B. No

Correct Answer: A

Reference: https://lifehacker.com/remove-wi-fi-profiles-from-windows-8-1-from-the-command-1449954864

QUESTION 8

You have a computer that runs Windows 10.
From the Settings app, you view the connection properties shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information
presented in the graphic. NOTE: Each correct selection is worth one point.

Hot Area:

Correct Answer:

QUESTION 9

You need to recommend a solution to configure the employee VPN connections. What should you include in the
recommendation?

A. Remote Access Management Console
B. Group Policy Management Console (GPMC)
C. Connection Manager Administration Kit (CMAK)
D. Microsoft Intune

Correct Answer: D

References: https://docs.microsoft.com/en-us/windows-server/remote/remote-access/vpn/always-on-vpn/deploy/vpndeploy-client-vpn-connections#bkmk_ProfileXML Testlet 2

QUESTION 10

You have an Azure Active Directory (Azure AD) tenant named contoso.com.
You have a workgroup computer named Computer1 that runs Windows 10.
You need to add Computer1 to contoso.com.

What should you use?

A. Computer Management
B. dsregcmd.exe
C. the Settings app
D. netdom.exe

Correct Answer: C

You join a computer to a domain, including an Azure AD domain in the Settings panel in Windows 10, under
System->About

References: https://aadguide.azurewebsites.net/aadjoin/

QUESTION 11

Your network contains an Active Directory domain. The domain contains 1,000 computers that run Windows 10.
You discover a known compatibility issue between a feature update and a device driver on the computers.
You need to test the installation of the feature update on a test computer.

Which Windows Update setting should you configure by using a Group Policy Object (GPO)?

A. Automatic Updates detection frequency
B. Disable safeguards for Feature Updates
C. Select the target Feature Update version
D. Reschedule Automatic Updates scheduled installations

Correct Answer: B

Reference: https://docs.microsoft.com/en-us/windows/deployment/update/safeguard-opt-out

QUESTION 12

You plan to deploy Windows 10 to 100 secure computers. You need to select a version of Windows 10 that meets the
following requirements:

1. Uses Microsoft Edge as the default browser
2. Minimizes the attack surface on the computer
3. Supports joining Microsoft Azure Active Directory (Azure AD)
4. Only allows the installation of applications from the Microsoft Store What is the best version to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer.

A. Windows 10 Pro in S mode
B. Windows 10 Home in S mode
C. Windows 10 Pro
D. Windows 10 Enterprise

Correct Answer: A

Uses Microsoft Edge as the default browser Minimizes the attack surface on the computer Supports joining Microsoft
Azure Active Directory (Azure AD) Only allows the installation of applications from the Microsoft Store

https://docs.microsoft.com/es-es/windows/deployment/s-mode

Windows 10 exam questions pdf free download

google drive: https://drive.google.com/file/d/1jKvqBuheZlh6HYezpjM5I-HvdACLAXl_/view?usp=sharing

Summarize:

Master the MD-100 theme material, practice the MD-100 practice test, and success belongs to you.

Does anyone know where I can find the material?

Real MD-100 exam dumps >>> https://www.pass4itsure.com/md-100.html (Total Questions 314)

You know that passing the Windows 10 exam is very helpful for our careers, but passing it is not easy. I’ve already answered this question above: All you need to do is take exam practice to improve your skills and get a real MD-100 Windows 10 dumps to help you pass successfully.