Search results for: MB-310

[July-2021] Get Pass4itSure (Microsoft MB-310) Exam Dumps As Practice Test And PDF

Pass4itSure Microsoft MB-310 exam dumps are designed with the help of Microsoft’s real exam content. You can get MB-310 VCE dumps and MB-310 PDF dumps from Pass4itSure! Check out the best and updated MB-310 exam questions by Pass4itSure MB-310 dumps https://www.pass4itsure.com/mb-310.html (Q&As: 149) (VCE and PDF), we are very confident that you will be successful on the Microsoft MB-310 exam.

Microsoft MB-310 exam questions in PDF file

Download those Pass4itSure MB-310 pdf from Google Drive:
https://drive.google.com/file/d/1mnXnerozPMvr5G9dC8_pAemihOKNjGHp/view?usp=sharing

Microsoft Role-based Certifications

AI-102 Exam: Designing and Implementing a Microsoft Azure AI Solution (beta)

Free AI-102 Exam Questions Answers
https://www.microsoft-technet.com/get-pass4itsure-microsoft-ai-102-exam-dumps-as-practice-test-and-pdf.html

AZ-600 Exam: Configuring and Operating a Hybrid Cloud with Microsoft Azure Stack Hub

Free AZ-600 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-az-600-exam-dumps-as-practice-test-and-pdf.html

DP-300 Exam: Administering Relational Databases on Microsoft Azure

Free DP-300 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-dp-300-exam-dumps-as-practice-test-and-pdf.html

MB-220 Exam: Microsoft Dynamics 365 Marketing

Free MB-220 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-220-exam-dumps-as-practice-test-and-pdf.html

MB-230 Exam: Microsoft Dynamics 365 Customer Service

Free MB-230 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-230-exam-dumps-as-practice-test-and-pdf.html

MB-240: Microsoft Dynamics 365 Field Service

Free MB-240 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-240-exam-dumps-as-practice-test-and-pdf.html

Following are some Microsoft MB-310 exam questions for review (Microsoft practice test 1-13)

QUESTION 1
HOTSPOT
You must configure journal controls in Dynamics 365 Finance.
MB-310 exam question q1
Use the drop-down menus to select the answer choice that answers each question based on the information presented
in the graphic. NOTE: Each correct selection is worth one point.
Hot Area:
MB-310 exam question q1-2
Correct Answer:
MB-310 exam question q1-3
 
QUESTION 2
You are configuring the basic budgeting for a Dynamics 365 Finance environment.
You need to configure the types of entries allowed.
Which two configurations can you use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point,
A. The budget register entry journals require both Expense and Revenue amount types.
B. Budget register entry line needs a main account and amount to be valid.
C. Budget register entry journals must be allocated across all fiscal periods.
D. Budget register entry lines must select only one account structure.
E. The budget register entries can contain either Expense or Revenue amount types.
Correct Answer: DE
 
QUESTION 3
You need to configure the system to resolve User8\\’s issue. What should you select?
A. the Standard sales tax checkbox
B. the Conditional sales tax checkbox
C. a main account in the settlement account field
D. a main account in the sales tax payable field
Correct Answer: C
QUESTION 4
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
A customer uses Dynamics 365 Finance. The customer creates a purchase order for purchase $20,000 of office
furniture.
You need to configure the system to ensure that the funds are reserved when the purchase order is confirmed.
Solution: Configure a posting definition for purchase orders.
Does the solution meet the goal?
A. Yes
B. No
Correct Answer: A
Reference: https://docs.microsoft.com/en-us/dynamics365/finance/general-ledger/example-posting-definitions
QUESTION 5
DRAG DROP
A customer plans to implement invoice validation policies.
You need to recommend the features needed to meet each of the customer\\’s requirements.
What should you recommend? To answer, drag the appropriate features to the correct requirements. Each feature may
be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view
content.
NOTE: Each correct selection is worth one point.
Select and Place:
MB-310 exam question q5
Correct Answer:
MB-310 exam question q5-2
QUESTION 6
SIMULATION
You are a functional consultant for Contoso Entertainment System USA (USMF).
You need to generate a trial balance report for the period of January 1, 2017 to December 31, 2017. To validate you
results, save the file in Microsoft Excel format to the Downloads\Trial folder.
To complete this task, sign in to the Dynamics 365 portal.
Correct Answer:
1.
Click General ledger > Reports > Transactions > Trial Balance
2.
Enter the Start and End dates for the report.
3.
Click Destinations … to specify how you want to `print\\’ the report.
4.
Select File as the destination.
5.
Select the Downloads\Trial folder for the location.
6.
Select Microsoft Excel for the file format.
7.
Click OK to close the `Print destination settings\\’ form.
8.
Click OK to `print\\’ (save) the report to the selected destination.
QUESTION 7
HOTSPOT
You need to configure the system to meet the budget preparation requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
MB-310 exam question q7
Correct Answer:
MB-310 exam question q7-2
 
QUESTION 8
You are configuring the year-end setup in Dynamics 365 Finance.
You need to configure the year-end setup to meet the following requirements:
The accounting adjustments that are received in the first quarter must be able to be posted into the previous year\\’s
Period 13.
The fiscal year closing can be run again, but only the most recent closing entry will remain in the transactions.
All dimensions from profit and loss must carry over into the retained earnings.
All future and previous periods must have an On Hold status.
Solution:
Configure General ledger parameters.

Set the Delete close of year transactions option to Yes.

Set the Create closing transactions during transfer option to Yes.

Set the Fiscal year status to permanently closed option to No. Define the Year-end close template.
-Designate a retained earnings main account for each legal entity.

Set the Financial dimensions will be used on the Opening transactions option to No.

Set the Transfer profit and loss dimensions
Correct Answer: A
Reference: https://docs.microsoft.com/en-us/dynamics365/unified-operations/financials/general-ledger/year-end-close
QUESTION 9
HOTSPOT
You need to set up legal entity currencies and conversions in Dynamics 365 Finance.
You review the hierarchy for consolidation of multiple legal entities.
MB-310 exam question q9
Use the drop-down menus to select the answer choice that answers each question based on the information presented
in the graphic. NOTE: Each correct selection is worth one point.
Hot Area:
MB-310 exam question q9-2
QUESTION 10
DRAG DROP
You are a controller in an organization. You are identifying cost drivers to see how changes in business activities affect
the bottom line of your organization. You need to assess cost object performance to analyze actual versus budgeted
cost
and how resources are consumed.
You need to demonstrate your understanding of cost accounting terminology.
Which component maps to the cost accounting terminology?
To answer, drag the appropriate component to the correct cost accounting terminology. Each source may be used once.
You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
MB-310 exam question q10
QUESTION 11
An organization plans to use defined journal names for each purpose. They want to ensure that journal processing is
easier and more secure. The organization has the following requirements:
1.
Set up restrictions on the account type and segment values.
2.
Capture data accurately for offset accounts, currency, and financial dimensions.
3.
Maintain internal control and establish materiality limits.
You need to set up journal name elements to meet these requirements.
Which three journal elements should you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. workflow approval
B. account type
C. journal type
D. default values
E. journal control
Correct Answer: ADE
Reference: https://docs.microsoft.com/en-us/dynamics365/finance/general-ledger/general-journal-processing
QUESTION 12
A client is implementing Accounts payable. The client wants to establish three-way matching for 100 of their 5,000
stocked items from a specific vendor.
The client requires the ability to have items that require only two-way matching and specific items that require three-way
matching.
You need to configure the system in the most efficient manner to achieve these requirements.
What should you do?
A. Configure a company matching policy of a three-way match
B. Configure a company matching policy of non-required and specify the items that require a three-way match
C. Configure a company matching policy of two-way matching and set the matching policy for specific item and vendor
combination level to three-way matching
D. Configure a company matching policy of two-way matching and specify the items that require a three-way match
E. Configure a company matching policy of two-way matching and specify the vendors that require a three-way match
Correct Answer: C
Reference: https://docs.microsoft.com/en-us/dynamics365/unified-operations/financials/accounts-payable/tasks/set-upaccounts-payable-invoice-matching-validation
 
QUESTION 13
DRAG DROP
You are configuring a Dynamics 365 Finance environment for intercompany accounting. You create the following legal
entities:
CompanyA
CompanyB
You need to configure intercompany accounting for both legal entities.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Select and Place:
MB-310 exam question q13
 

Thanks for reading! Hope the newest MB-310 exam dumps can help you in your exam. Get full MB-310 exam questions to try Pass4itSure MB-310 dumps! MB-310 dumps in VCE and PDF are here: https://www.pass4itsure.com/mb-310.html (Updated: Jul 21, 2021).

Download Pass4itSure MB-310 dumps pdf from Google Drive:
https://drive.google.com/file/d/1mnXnerozPMvr5G9dC8_pAemihOKNjGHp/view?usp=sharing (MB-310 Exam Questions)

Microsoft Dynamics 365 Exam Dumps

Exam Name Free Online practice test Free PDF Dumps Premium Exam Dumps
Microsoft Dynamics 365 Customer Engagement Core (MB-200) Free MB-200 Practice Test (Online) Free MB-200 PDF Dumps (Download) pass4itsure MB-200 Exam Dumps (Premium)
Microsoft Dynamics 365 for Sales (MB-210) Free MB-210 Practice Test (Online) Free MB-210 PDF Dumps (Download) pass4itsure MB-210 Exam Dumps (Premium)
Microsoft Dynamics 365 for Marketing (MB-220) Free MB-220 Practice Test (Online) Free MB-220 PDF Dumps (Download) pass4itsure MB-220 Exam Dumps (Premium)
Microsoft Dynamics 365 for Customer Service (MB-230) Free MB-230 Practice Test (Online) Free MB-230 PDF Dumps (Download) pass4itsure MB-230 Exam Dumps (Premium)
Microsoft Dynamics 365 for Field Service (MB-240) Free MB-240 Practice Test (Online) Free MB-240 PDF Dumps (Download) pass4itsure MB-240 Exam Dumps (Premium)
Microsoft Dynamics 365 Unified Operations Core (MB-300) Free MB-300 Practice Test (Online) Free MB-300 PDF Dumps (Download) pass4itsure MB-300 Exam Dumps (Premium)
Microsoft Dynamics 365 for Finance and Operations, Financials (MB-310) Free MB-310 Practice Test (Online) Free MB-310 PDF Dumps (Download) pass4itsure MB-310 Exam Dumps (Premium)
Microsoft Dynamics 365 for Finance and Operations, Manufacturing (MB-320) Free MB-320 Practice Test (Online) Free MB-320 PDF Dumps (Download) pass4itsure MB-320 Exam Dumps (Premium)
Microsoft Dynamics 365 for Finance and Operations, Supply Chain Management (MB-330) Free MB-330 Practice Test (Online) Free MB-330 PDF Dumps (Download) pass4itsure MB-330 Exam Dumps (Premium)
Microsoft Power Apps + Dynamics 365 Developer (MB-400) Free MB-400 Practice Test (Online) Free MB-400 PDF Dumps (Download) pass4itsure MB-400 Exam Dumps (Premium)
Microsoft Dynamics 365: Finance and Operations Apps Developer (MB-500) Free MB-500 Practice Test (Online) Free MB-500 PDF Dumps (Download) pass4itsure MB-500 Exam Dumps (Premium)
Microsoft Dynamics 365 + Power Platform Solution Architect (MB-600) Free MB-600 Practice Test (Online) Free MB-600 PDF Dumps (Download) pass4itsure MB-600 Exam Dumps (Premium)
Microsoft Dynamics 365: Finance and Operations Apps Solution Architect (MB-700) Free MB-700 Practice Test (Online) Free MB-700 PDF Dumps (Download) pass4itsure MB-700 Exam Dumps (Premium)
Microsoft Dynamics 365 Fundamentals (MB-901) Free MB-901 Practice Test (Online) Free MB-901 PDF Dumps (Download) pass4itsure MB-901 Exam Dumps (Premium)
Microsoft Dynamics 365 Fundamentals Customer Engagement Apps (CRM) (MB-910) Free MB-910 Practice Test (Online) Free MB-910 PDF Dumps (Download) pass4itsure MB-910 Exam Dumps (Premium)
Microsoft Dynamics 365 Fundamentals Finance and Operations Apps (ERP) (MB-920) Free MB-920 Practice Test (Online) Free MB-920 PDF Dumps (Download) pass4itsure MB-920 Exam Dumps (Premium)

[August -2021] Get Pass4itSure (Microsoft MB-400) Exam Dumps As Practice Test And PDF

Pass4itSure Microsoft MB-400 exam dumps are designed with the help of Microsoft’s real exam content. You can get MB-400 VCE dumps and MB-400 PDF dumps from Pass4itSure! Check out the best and updated MB-400 exam questions by Pass4itSure MB-400 dumps https://www.pass4itsure.com/mb-400.html (Q&As: 61) (VCE and PDF), we are very confident that you will be successful on the Microsoft MB-400 exam.

Microsoft MB-400 exam questions in PDF file

Download those Pass4itSure MB-400 pdf from Google Drive: https://drive.google.com/file/d/1DxjuRhtPJeDlcAL_7Y3mm8jxO6NioGgx/view?usp=sharing

Microsoft Role-based Certifications

Free MB-230 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-230-exam-dumps-as-practice-test-and-pdf.html

MB-240: Microsoft Dynamics 365 Field Service

Free MB-240 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-240-exam-dumps-as-practice-test-and-pdf.html

MB-310: Microsoft Dynamics 365 Finance

Free MB-310 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-310-exam-dumps-as-practice-test-and-pdf.html

MB-320: Microsoft Dynamics 365 Supply Chain Management, Manufacturing

Free MB-320 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-320-exam-dumps-as-practice-test-and-pdf.html

MB-330: Microsoft Dynamics 365 Supply Chain Management

Free MB-330 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-330-exam-dumps-as-practice-test-and-pdf.html

Following are some Microsoft MB-400 exam questions for review (Microsoft practice test 1-13)

QUESTION 1
A company needs to illustrate the relationships of the entities in Dynamics 365 Customer Engagement.
You need to select the appropriate tool to show this graphic.
Which tool should you select?
A. Security model
B. Metadata diagram
C. Power BI
D. Web services
Correct Answer: B
Visual representation of metadata can be very useful, especially when you are trying to describe the relationship
between entities in the system. You can use the Metadata Diagram sample code provided for Dynamics 365 Customer
Engagement (on-premises) to generate the entity relationship diagrams. You can create a simple diagram that shows a
relationship for just one entity, or a complex diagram that includes dozens of related entities, including custom and
system entities.
Reference: https://docs.microsoft.com/en-us/dynamics365/customerengagement/on-premises/developer/use-metadatagenerate-entity-diagrams

QUESTION 2
You need to modify Microsoft Flow to resolve CustomerC\\’s issue. What should you do?
A. Add a condition containing approval hierarchy.
B. Add a timeout setting to the approval flow.
C. Add a configure run that is set to is successful.
D. Add a data operation that specifies the false conditions.
Correct Answer: B
Scenario: CustomerC requested additional information from the parts department through the customer survey and has
not received a response one week later.
Imagine having a process where you want to give someone a couple of days to reply to an approval. If that someone
doesn\\’t respond in time, you want to assign a new approval to another person or group of people. To achieve this you
can set the timeout in the action settings.
Reference: https://www.o365dude.com/2018/06/02/timeout-flow-approvals/

QUESTION 3
HOTSPOT
A company is preparing to go live with their Dynamics 365 Customer Engagement solution, but first they need to
migrate data from a legacy system. The company is migrating accounts in batches of 1,000.
When the data is saved to Dynamics 365 Customer Engagement, the IDs for the new accounts must be output to a log
file.
You have the following code:

MB-400 exam questions-q3

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

MB-400 exam questions-q3-2

Box 1: Yes
Box 2: Yes Even when ReturnResponses is false, the Responses collection will not be empty if errors are returned. If
errors are returned, there will be one response item in the collection for each processed request that returned a fault
and Fault will be set to the actual fault that occurred.
Box 3: No ContinueOnError, here set to true: when true, continue processing the next request in the collection even if a
fault has been returned from processing the current request in the collection. When false, do not continue processing
the next request.
Box 4: Yes Even when ReturnResponses is false, the Responses collection will not be empty if errors are returned. If
errors are returned, there will be one response item in the collection for each processed request that returned a fault
and Fault will be set to the actual fault that occurred.
Reference: https://docs.microsoft.com/en-us/powerapps/developer/common-data-service/org-service/execute-multiplerequests

QUESTION 4
A client uses a model-driven app that is deployed by using a managed solution in the production environment. The app
contains only entities and UI components and has no custom code or extensions to the platform.
The client needs an exact copy of the app with a different name in the production environment.
You need to recreate this app in production without disrupting the end users.
What should you do?
A. Select the original model-driven app, select Edit, and then select Save As.
B. Create a new model-driven app. Select the Use existing solution to create the App check box, and then select the
solution that contains the original app.
C. Select the managed solution and select Clone.
D. Create a new model-driven app, manually add each component, and then recreate its original functions.
E. Add the original app to a solution, export it as unmanaged, import it into a test environment and rename it, and then
deploy it back into production.
Correct Answer: B
The option Use existing solution allow users to select a specific solution for this app. Users can create a whole new
design from scratch by not checking check box of use existing solution.
Reference: https://www.inogic.com/blog/2019/02/create-model-driven-app-cds-environment/

QUESTION 5
DRAG DROP
A company uses Common Data Service (CDS) and manages their engineers using a model-driven app.
You create a new reusable custom component using the PowerApps component framework (PCF).
You need to package the custom component to be deployed into the model-driven app.
Which three commands should you run in sequence? To answer, move the appropriate actions from the list of actions to
the answer area and arrange them in the correct order.
Select and Place:

MB-400 exam questions-q5

Step 1: npm install
Install Npm
Step 2: pac pcf init ..
Commands for working with Power Apps component framework. It has the following parameters:
init: Initializes the code component project. It has the following parameters
namespace: Namespace of the code component.
name: Name of the code component.
template: Field or dataset
Step 3: pac solution add-reference
Commands for working with Common Data Service solution projects. It has the following parameters:
add-References:
Sets the reference path to the component project folder by passing the path parameter.
Syntax: pac solution add-reference –path
Incorrect Answers:
pac solution init ..
Commands for working with Common Data Service solution projects. We are working with a PowerApps component
framework project though.
Reference:
https://docs.microsoft.com/en-us/powerapps/developer/common-data-service/powerapps-cli

QUESTION 6
You need to create the model-driven app for referrals. Which function should you add?
A. Subgrid
B. Business rule
C. Flow
D. Chart
E. Workflow
Correct Answer: B
Explanation: B
Scenario: When the account is entered into the system, extra fields must appear if the referral customer box is selected.
If the box is not selected, the extra fields must not appear.

QUESTION 7
DRAG DROP
Five high schools test a custom app from AppSource. They provide feedback that the Course credit entity should
include additional fields that cover information shared by the schools.
You do not have access to each high school organization.
Each high school administrator must be able to apply the updates to the Course credit entity.
You need to deliver a custom program that creates the additional fields.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to
the answer area and arrange them in the correct order.
Select and Place:

MB-400 exam questions-q7

Correct Answer:

MB-400 exam questions-q7-2

Step 1: Call the login logic.
Step 2: Retrieve the Course credit entity metadata by using RetrieveEntityRequest with EntityFilters = Attributes and
LogicalName
The RetrieveEntityRequest.EntityFilters property gets or sets a filter to control how much data for the entity is retrieved.
Step 3: Define the AttributeMetaData for each new field.
Step 4: Call the RetrieveAttributeRequest with LogicalName for each new field.
The RetrieveAttributeRequest contains the data that is needed to retrieve attribute metadata.
Reference:
https://docs.microsoft.com/enus/dotnet/api/microsoft.xrm.sdk.messages.retrieveentityrequest.entityfilters?view=dynamics-general-ce-9

QUESTION 8
You need to create an application to deploy to other pharmacies. What should you do?
A. Recreate customizations in a new environment.
B. Navigate to Customize the System and export everything to a managed solution.
C. Clone the solution
D. Create packages for Package Deployer.
Correct Answer: D
Scenario: The new solution will be sold to other pharmacies for use. The application must not allow changes to be
made.
Microsoft Dynamics CRM Package Deployer enables administrators to deploy packages on Customer Engagement (onpremises) or Common Data Service environment.
Incorrect Answers:
B: You can only export an unmanaged solution.
Reference: https://docs.microsoft.com/en-us/dynamics365/customerengagement/on-premises/customize/exportsolution

QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
An organization has an Azure SQL Database instance that must be synchronized daily with data from Dynamics 365
Sales. A large amount of data might need to be synchronized on some days.
You need to reduce the time required to synchronize data.
Solution:
1.
Write a SSIS package to connect to the source and target.
2.
Develop the SSIS package to find the records by the Modified on field.
3.
Create or update the records in the database instance based on results. Does the solution meet the goal?
A. Yes
B. No
Correct Answer: B
Instead enable change tracking for entities that will be synchronized, and use the Data Export Service to sync data
between the database and Dynamics 365 Sales.
Reference: https://docs.microsoft.com/en-us/power-platform/admin/enable-change-tracking-control-data-synchronization
https://docs.microsoft.com/en-us/power-platform/admin/replicate-data-microsoft-azure-sql-database

QUESTION 10
HOTSPOT
You need to complete a PowerApps component framework (PCF) control.
How should you define the order in the manifest? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

MB-400 exam questions-q10

Correct Answer:

MB-400 exam questions-q10-2

The order property specifies the order of a flexible item relative to the rest of the flexible items inside the same
container.
Reference: https://www.w3schools.com/jsref/prop_style_order.asp


QUESTION 11
DRAG DROP
You need to select the appropriate methods using the Azure Event Grid.
Which method should you use for each requirement? To answer, drag the appropriate methods to the correct
requirements. Each method may be used once, more than once, or not at all. You may need to drag the split bar
between panes or
scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

MB-400 exam questions-q11

Box 1: Event handler
Event handlers – The app or service reacting to the event.
Box 2: Event subscriptions
Event subscriptions – The endpoint or built-in mechanism to route events, sometimes to more than one handler.
Subscriptions are also used by handlers to intelligently filter incoming events.
Note:
There are five concepts in Azure Event Grid that let you get going:
Events – What happened.
Event sources – Where the event took place.
Topics – The endpoint where publishers send events.
Event subscriptions – The endpoint or built-in mechanism to route events, sometimes to more than one handler.
Subscriptions are also used by handlers to intelligently filter incoming events.
Event handlers – The app or service reacting to the event.
Reference:
https://docs.microsoft.com/en-us/azure/event-grid/overview

QUESTION 12
DRAG DROP
You need to assign the minimum environment security role to the appropriate users.
Which security roles should you use? To answer, drag the appropriate security roles to the correct users. Each security
role may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to
view
content.
NOTE: Each correct selection is worth one point.
Select and Place:

MB-400 exam questions-q12

 Correct Answer:

MB-400 exam questions-q12-2

Box 1: Common Data Service User
UserA must be able to create and publish PowerApps apps.
Common Data Service directly against your core business data already used within Dynamics 365 without the need for
integration.
1.
Build Apps against your Dynamics 365 Data
2.
Manage reusable Business logic and rules
3.
Reusable skills across Dynamics 365 and Power Apps
Box 2: Environment Maker
UserB must be the owner of all the systems and be able to provide permissions and create all new environments.
The Environment Maker role can create resources within an environment including apps, connections, custom
connectors, gateways, and flows using Power Automate.
Box 3: System Administrator
UserC must be able to create apps connected to the systems and update the security roles and entities.
System Administrator is the highest level role which encompasses all the privileges and has over-riding rights. The
System Administrator has the authority to allow and remove access of other users and define the extent of their rights.
For
example, the System Administrator and the System Customizer are given access to custom entities by default while all
other users need to be given access. This is the only role that cannot be edited.
Box 4: System Customizer
End users must have minimum access to the required systems.
Sales users must only have access to their own records.
The System Customizer role is similar to the System Administrator role which enables non-system administrators to
customize Dynamics 365. A Customizer is a user who customizes entities, attributes and relationships.
Reference:
https://docs.microsoft.com/en-us/power-platform/admin/environments-overview
https://crmbook.powerobjects.com/system-administration/business-administration/security-roles/

QUESTION 13
You need to replace the bicycle inspection forms.
Which two solutions should you use? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. a canvas app that guides the technician through the inspection
B. a logic app that guides the technician through the inspection
C. a flow that maps inspection data to Dynamics 365 for Field Service
D. a model-driven app based on customer service entities
Correct Answer: CD
Scenario: The Adventure Works Cycles retail location performs bicycle inspections and performance tune-ups.
Technicians use paper forms to document the bicycle inspection performed before a tune-up and any additional work
performed on the bicycle.
C: The Dynamics 365 Field Service business application helps organizations deliver onsite service to customer
locations. The application combines workflow automation, scheduling algorithms, and mobility to set mobile workers up
for success when they\\’re onsite with customers fixing issues.
D: Model-driven apps are good for creating end-to-end solutions. For example, after a customer service support ticket
has been created, it must be routed, addressed, updated, marked as complete, and so on. There will likely be quite a
few teams, roles, and processes involved in this complete cycle of case resolution, which would require a model-driven
app.
Reference: https://docs.microsoft.com/en-us/dynamics365/field-service/overview
https://us.hitachi-solutions.com/blog/canvas-vs-model-driven-apps/

Thanks for reading! Hope the newest MB-400 exam dumps can help you in your exam. Get full MB-400 exam questions to try Pass4itSure MB-400 dumps! MB-400 dumps in VCE and PDF are here: https://www.pass4itsure.com/mb-400.html (Updated: Aug 02, 2021).

Download Pass4itSure MB-400 dumps pdf from Google Drive: https://drive.google.com/file/d/1DxjuRhtPJeDlcAL_7Y3mm8jxO6NioGgx/view?usp=sharing (MB-400 Exam Questions)

[August -2021] Get Pass4itSure (Microsoft MB-330) Exam Dumps As Practice Test And PDF

Pass4itSure Microsoft MB-330 exam dumps are designed with the help of Microsoft’s real exam content. You can get MB-330 VCE dumps and MB-330 PDF dumps from Pass4itSure! Check out the best and updated MB-330 exam questions by Pass4itSure MB-330 dumps https://www.pass4itsure.com/mb-330.html (Q&As: 189) (VCE and PDF), we are very confident that you will be successful on the Microsoft MB-330 exam.

Microsoft MB-330 exam questions in PDF file

Download those Pass4itSure MB-330 pdf from Google Drive: https://drive.google.com/file/d/1VIdh_Uyftqd3E1V2F6TBcNDTn49JnsAl/view?usp=sharing

Microsoft Role-based Certifications

Free MB-230 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-230-exam-dumps-as-practice-test-and-pdf.html

MB-240: Microsoft Dynamics 365 Field Service

Free MB-240 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-240-exam-dumps-as-practice-test-and-pdf.html

MB-310: Microsoft Dynamics 365 Finance

Free MB-310 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-310-exam-dumps-as-practice-test-and-pdf.html

MB-320: Microsoft Dynamics 365 Supply Chain Management, Manufacturing

Free MB-320 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-320-exam-dumps-as-practice-test-and-pdf.html

Following are some Microsoft MB-330 exam questions for review (Microsoft practice test 1-13)

QUESTION 1
Employee 1 needs to set up the new items for the product line
Which two actions should Employee1 perform? Each correct answer presents part of the solution.
NOTE Each correct selection is worth one point.
A. Create new finished goods and release to the legal entity
B. Create new raw materials and release to the legal entity.
C. Create new finished goods with predefined variants and release to the legal entity.
D. Create new finished goods and release to the legal entity. Raw material products are not required for these items.
E. Create new raw materials with variants and release to the legal entity.
Correct Answer: CE

QUESTION 2
A company has several warehouse locations. The company acquires a new warehouse.
You must design a new warehouse process workflow for the new warehouse.
You need to configure the workflow.
Which three features should you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. work pools
B. cluster picking
C. outbound wave processing
D. work templates
E. wave templates
Correct Answer: ADE
Reference: https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/warehousing/warehousemanagement-overview

QUESTION 3
A company manufactures street, mountain, and racing bicycles.
The company wants to use product variants to control bicycle configuration.
You need to configure the bicycles in the system.
What should you do?
A. Create mountain, street, and racing bicycles as separate configuration models.
B. Use one item number for all types of bicycles. Use a separate configuration number for each type of bicycle.
C. Use different item numbers for mountain, street, and racing bicycles.
Correct Answer: A

QUESTION 4
DRAG DROP
A company implements warehouse locations in Dynamics 365 Supply Chain Management.
You need to configure location directives for inventory movement.
Which configurations should you use? To answer, drag the appropriate strategies to the correct requirements. Each
strategy may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to
view
content.
NOTE: Each correct selection is worth one point.
Select and Place:

MB-330 exam questions-q4

Correct Answer:

MB-330 exam questions-q4-2

QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
A vendor is offering a rebate program on bottles of wine that have purchase orders placed within a month. There is a
$5.00 rebate on the purchase of 10-100 bottles and a $6.00 rebate for the purchase of 101-200 bottles. Customers can
purchase wine by the bottle or by the case. Discounts apply to all varieties of wine sold by the vendor.
You need to create a vendor rebate agreement to ensure that the correct rebate amount is claimed at the end of the
month.
Solution: On the rebate agreement, set the start date to be the first of the month. Set the expiry date to be 30 days.
Does the solution meet the goal?
A. Yes
B. No
Correct Answer: B

QUESTION 6
A warehouse uses mobile devices for locating products.
Products are listed in the Inventory module in incorrect locations. Users must therefore manually locate products to be
picked. You need to ensure that the users\\’ mobile device updates ^locations of the products.
Which two actions should you take to update product locations by using the mobile devices?
Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. Scan a shelf barcode and update the inventory.
B. Manually find the physical location of the product.
C. Log into a desktop computer and update the Inventory module
D. Manually move product to the correct physical location
Correct Answer: BD

QUESTION 7
HOTSPOT
A company uses outside carrier services for inbound and outbound deliveries.
Carrier services must be scheduled so that all trucks do not show up at the same time.
You need to configure the c module to schedule the loads.
How should you set up dock appointments? To answer, select the appropriate options i the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

MB-330 exam questions-q7

Correct Answer:

MB-330 exam questions-q7-2

Reference: https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/plan-appointments-for-a-load

QUESTION 8
You are the customer relations manager at a wholesale company.
You perform promotion planning and must track fund usage.
You need to set up a trade allowance agreement to register and track promotion contracts.
Which two items should you set up prior to creating the agreement? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Sales category hierarchy
B. Opportunity reasons
C. Customer category hierarchy
D. Trade allowance funds
Correct Answer: CD
References: https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/sales-marketing/tradeallowance

QUESTION 9
An employee at a company needs to lay out the various component to build custom bicycles.
You need to identify which constraints the employee should use to set up the bicycles.
Which two types of constraints the employee use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. table constraints that are used generically among product configuration models
B. expression constraints that are used generically among product configuration models
C. expression constraints that are unique to each product configuration model
D. table constraints that are always unique to each product configuration model
Correct Answer: AC
References: https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/pim/expression-constraintstable-constraints-product-configuration-models

QUESTION 10
SIMULATION
You are a functional consultant for a company named Contoso Entertainment System USA (USMF).
You need to regenerate a master plan named DynPlan for item number D0023.
To complete this task, sign in to Dynamics 365 portal.
Correct Answer: See below.
You specify the planning method in the Master planning run dialog box. To open this dialog box, go to Master planning >
Master planning > Run > Master planning, or select Run in the Master planning workspace.
Regeneration
The regeneration planning method deletes existing planned orders, unless they are firmed. It generates new planned
orders, based on all the requirements. Regeneration is the only planning method that is available for static plans.
1.
Changes in supply are considered. These changes include changes in the forecast.
2.
This method respects the Period coverage code.
3.
This method supports product substitution functionality (PI).
Select DynPlan in the Master Plan field.
Select Regeneration in the Planning Method field.
Enter D0023 in the Item Number field.

QUESTION 11
DRAG DROP
A company plans to use warehouse management and dock appointment scheduling in Dynamics 365 Supply Chain
Management.
You need to configure the system.
Which configuration options should you use? To answer, drag the appropriate configuration options to the correct
requirements. Each configuration option may be used once, more than once, or not at all. You may need to drag the
split bar
between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

MB-330 exam questions-q11

Correct Answer:

MB-330 exam questions-q11-2

QUESTION 12
A distribution company wants to set up barcodes in their Dynamics 365 Supply Chain Management system for
warehouse scanning.
Barcodes will be entered manually.
You need to minimize the risk of errors on barcode entry.
What should you do?
A. Create a new barcode, enter the value, select the type, and enter the mask.
B. Select an item, select the barcode type, select max length, and enter the value.
C. Select an item and set up security on the barcode field.
D. Create a new barcode, enter the value, select the type, and enter the size and max length.
Correct Answer: B

QUESTION 13
SIMULATION
You are a functional consultant for a company named Contoso Entertainment System USA (USMF).
You need to copy the bill of materials (BOM) of item number T0012 to a new BOM.
To complete this task, sign in to Dynamics 365 portal.
Correct Answer: See below.
1.
Open item number T0012.
2.
Go to Engineer >BOM>Lines and select the BOM for the item.
3.
Click on Create BOM.
4.
Select the Copy option.
5.
Ensure the Add option is selected to create a new BOM rather than overwrite the existing BOM.
6.
Click OK.

Thanks for reading! Hope the newest MB-330 exam dumps can help you in your exam. Get full MB-330 exam questions to try Pass4itSure MB-330 dumps! MB-330 dumps in VCE and PDF are here: https://www.pass4itsure.com/mb-330.html (Updated: Jul 29, 2021).

Download Pass4itSure MB-330 dumps pdf from Google Drive: https://drive.google.com/file/d/1VIdh_Uyftqd3E1V2F6TBcNDTn49JnsAl/view?usp=sharing (MB-330 Exam Questions)

[July-2021] Get Pass4itSure (Microsoft MB-320) Exam Dumps As Practice Test And PDF

Pass4itSure Microsoft MB-320 exam dumps are designed with the help of Microsoft’s real exam content. You can get MB-320 VCE dumps and MB-320 PDF dumps from Pass4itSure! Check out the best and updated MB-320 exam questions by Pass4itSure MB-320 dumps https://www.pass4itsure.com/mb-320.html (Q&As: 142) (VCE and PDF), we are very confident that you will be successful on the Microsoft MB-320 exam.

Microsoft MB-320 exam questions in PDF file

Download those Pass4itSure MB-320 pdf from Google Drive:

Microsoft Role-based Certifications

AI-102 Exam: Designing and Implementing a Microsoft Azure AI Solution (beta)

Free AI-102 Exam Questions Answers
https://www.microsoft-technet.com/get-pass4itsure-microsoft-ai-102-exam-dumps-as-practice-test-and-pdf.html

AZ-600 Exam: Configuring and Operating a Hybrid Cloud with Microsoft Azure Stack Hub

Free AZ-600 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-az-600-exam-dumps-as-practice-test-and-pdf.html

DP-300 Exam: Administering Relational Databases on Microsoft Azure

Free DP-300 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-dp-300-exam-dumps-as-practice-test-and-pdf.html

MB-220 Exam: Microsoft Dynamics 365 Marketing

Free MB-220 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-220-exam-dumps-as-practice-test-and-pdf.html

MB-230 Exam: Microsoft Dynamics 365 Customer Service

Free MB-230 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-230-exam-dumps-as-practice-test-and-pdf.html

MB-240: Microsoft Dynamics 365 Field Service

Free MB-240 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-240-exam-dumps-as-practice-test-and-pdf.html

MB-310: Microsoft Dynamics 365 Finance

Free MB-310 Exam Questions Answers https://www.microsoft-technet.com/get-pass4itsure-microsoft-mb-310-exam-dumps-as-practice-test-and-pdf.html

Following are some Microsoft MB-320 exam questions for review (Microsoft practice test 1-13)

QUESTION 1
A company produces paints and assembles bicycle frames.
You must account for paint drying time before assembly operations can begin. You need to set up the operation to
encompass queue times.
Which two options can you use? Each correct answer presents part of solution.
NOTE: Each correct selection is worth one point.
A. Enter a value in the queue time after field for the painting operation
B. Make a resource group for each size and color and assign that group to the operation
C. Enter a value in the transit time on the painting operation
D. Enter a value in the queue time before field for the assembly operation
E. Build capabilities for each resource related to color
Correct Answer: AD


QUESTION 2
You need to set up the state control for sales of motorcycles.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Create an inclusive restricted product list for United States. Do not add the motorcycle part to the list.
B. Create an inclusive restricted product list for United States and add the motorcycle part to the list.
C. Create an exclusive restricted product list for California and add the motorcycle part to the list.
D. Create an exclusive restricted product list for Missouri and add the motorcycle part to the list.
Correct Answer: BC
https://stoneridgesoftware.com/working-with-restricted-products-in-dynamics-365-operations/

QUESTION 3
You are the lead product design engineer at a plastics manufacturing company. You implement a new process that uses
a single tool to produce three finished goods at the same time.
You need to set up the planning item number and formula to correctly to manufacture the three items.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Create item number for planning item and the associated formula
B. Add minimum and maximum quantities on formula
C. Add a coverage group to the formula
D. Assign co-products to the formula
E. Specify each of the finished good items as co-products
Correct Answer: ADE

QUESTION 4
A company plans to implement Dynamics 365 for Finance and Operations.
You need to determine which manufacturing solutions to use.
Which manufacturing solution should you use? To answer, drag the appropriate setting to the correct drop targets. Each
source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to
view content.
NOTE: Each correct selection is worth one point.
Select and Place:

MB-320 exam questions-q4

Correct Answer:

MB-320 exam questions-q4-2

QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
A company implements Dynamics 365 for Finance and Operations for their Lean manufacturing environment.
There has been an engineering change to a fixed quantity product that is in production. This change will add an
additional processing step as the second step. The existing version must be phased out and replaced by the new
version.
You need to ensure that the engineering change takes affect at the end of the month.
Solution:
1.
Edit the existing production flow and set the expiration date to the end of the month.
2.
Using the existing production flow, create a production flow and version. Set the expiration date to the end of the month.
Create an activity for the new process step and add it in the proper sequence.
3.
Create a Kanban rule that uses the last day of the month as the effective date.
4.
Edit the existing Kanban rule. Set the expiration date to the end of the month. Set the new Kanban rule as the
replacement Kanban rule.
5.
Activate the new production flow. Does the solution meet the goal?
A. Yes
B. No
Correct Answer: A

QUESTION 6
HOTSPOT
You need to resolve the shop supervisor\\’s issue.
Which options should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

MB-320 exam questions-q6

Correct Answer:

MB-320 exam questions-q6

QUESTION 7
SIMULATION
You are a functional consultant for Contoso Entertainment System USA.
You need to configure the system to ensure that the production release to warehouse process either performed
manually or via batch.
To complete this task, sign in to Dynamics 365 portal.
Correct Answer:
Navigate to Production control > Setup > Production parameters.
Configure the Production line release parameter to Release BOM and formula lines via a batch job or as a manual
interaction.

QUESTION 8
You need to configure costing for raw materials used to manufacture unscented cleaning solution. Which form should
you use?
Case Study Title (Case Study):
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to
complete each case. However, there may be additional case studies and sections on this exam. You must manage your
time to
ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case
study. Case studies might contain exhibits and other resources that provide more information about the scenario that is
described in the case study. Each question is
independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make
changes before you move to the next section of the exam. After you begin a new section, you cannot return to this
section.
To start the case study
To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the
content of the case study before you answer the questions. Clicking these buttons displays information such as
business
requirements, existing environment, and problem statements.
If the case study has an All Information tab, note that the information displayed is identical to the information displayed
on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Current environment Products manufactured
Cleaning equipment
1.
– floor cleaner
2.
– pressure washers
3.
– scrubbers
4.
– vacuums
Liquid cleaning solutions
1.
– No scent
2.
– Orange scent (subcontracted to a vendor named VendorA)
3.
– Pine scent (subcontracted to a vendor named VendorA)
The production quantity for the finished unscented liquid cleaning solution is 40-liters. IngredientC for unscented liquid
cleaning solution is stored in inventory in 50-liter barrels and allocated in 50-liter increments. Two barrels of IngredientC
are used to produce a barrel of unscented liquid cleaning solution.
Production sites
The Eastern United States facility manufactures equipment.
The Western United States facility manufactures liquid cleaning solutions.
Raw materials and finished products are stocked at the warehouse and distributed from the warehouse.
Warehouse facilities
The warehouse consists of the following zones:

MB-320 exam questions-q8

RequirementsCleaning equipment manufacturing
You identify the following requirements for manufacturing cleaning equipment:
1.
Production is Make to Stock and must be scheduled at an operational level.
2.
Machine equipment is produced on an assembly line. Scheduling must be based on production orders.
3.
Finished products must be packaged and shipped directly from the warehouse.
4.
To reduce delivery times and excess inventory, equipment must be produced as needed.
5.
The ability to schedule production must be based on resource capacity and the availability of required material.
6.
Production order operations must be scheduled to start only when capacity and materials are available at the same time
and in the required quantities.
Liquid cleaning solution manufacturing
Latest MB-320 Dumps | MB-320 VCE Dumps | MB-320 Study Guide 8 / 17https://www.pass4itsure.com/mb-320.html
2021 Latest pass4itsure MB-320 PDF and VCE dumps Download
1.
Production is Make to Order and is scheduled at the job level Products must be manufactured in batches.
2.
Finished products must be packaged and shipped directly from the warehouse.
3.
You must be able to calculate the estimated consumption of ingredients and ensure that the amount is divisible by the
number of units the raw material is available.
4.
Formula changes must be reviewed and approved. You must ensure that approved formulas cannot be deleted or
edited. Approved formulas may be deactivated.
5.
An ingredient used to manufacture unscented cleaning solution is defined as a restricted product.
6.
You must be able to automatically print a product safety data sheet (PSDS) with the packing slip for any order that
includes unscented cleaning solution.
7.
Production must be schedule to start by date and time according to the order that is specified by the production route.
You must implement a scheduled Kanban rule that meets the following requirements:
1.
Prevent overloading a work cell for scheduled Kanbans.
2.
Visualize excess inventory in a supermarket.
3.
Store products in supermarkets before they are consumed or shipped.
4.
You must link relevant financial dimension data to the inventory transactions at each site to ensure that you can trace
profit and loss figures directly to East site and West site respectively.
5.
You must set up production operations for sub-contracting of Pine scent and Orange scent solution to VendorA to
ensure that a purchase order is automatically created base on estimation of a production order.
Costing
1.
The price of raw materials used for manufacturing unscented cleaning solution must be tracked based upon commodity
exchange pricing. The margin and cost multiplier must be set up for commodity traded raw material.
2.
You must set up cost calculation groups to ensure that indirect costs that originate in the manufacturing of finished
goods are recognized and absorbed into the product cost.
3.
The production manager needs to set up picking list journals and BOM item consumption.
Reporting
1.
Production control parameters must be setup for reporting of automatic BOM and Route consumption.
2.
You must create reports that include information about cost records and categories for items, and calculation formulas
for indirect costs.
3.
You must treat manufactured items as purchased items for cost roll-up purposes during BOM calculations and
reporting.
4.
You must configure automatic route consumption in connection with the automatic running of Report as finished.
Inventory control
You must not be required to track the lot number for items when you enter inventory information into the system. Lot
numbers for items must be entered when items are picked from inventory.
Issues
Users report the following issues:
1.
The production manager observes that items are being deducted from inventory two times on production jobs. A shop
supervisor mistakenly registers the process for assembling batteries for the pressure washers to Registered as
prepared. You must reschedule the process for a future date.
2.
Customer1 orders 20 barrels of unscented solution. The order is confirmed. Production must be scheduled to start on
December 21 to meet the customers delivery deadline.
3.
User2 reports that costs for manufactured items are twice as high as expected.
4.
UserD reports that the formula for the liquid cleaning solution sometimes changes during production. You must enforce
the policies regarding formula editing for current and future use.
A. Cost basis type
B. Quantity and margin template
C. Pricing calculation
D. Pricing template
Correct Answer: B
Reference: https://docs.microsoft.com/en-us/dynamicsax-2012//quantity-and-margin-templateform?redirectedfrom=MSDN

QUESTION 9
A manufacturing company is implementing Dynamics 365 for Finance and Operations. The company uses a standard
costing model to value inventory.
During the setup of the system, all areas that impact the standard cost of the item must be configured correctly to
calculate a complete standard cost by using routing, Bill of materials (BOM) and overhead burden.
You need to verify that all areas of the system are correctly configured.
Which object does NOT impact the standard cost of manufactured items?
A. item group
B. cost groups
C. cost categories
D. BOM formula
Correct Answer: D


QUESTION 10
A glass bottle manufacturer uses route operations to schedule resources and track manufacturing costs.
The company has recently seen an increase in demand and purchases another resource. The company uses the same
costs per resource. However, the new resource costs more to run. The company must be able to track cost
contributions
for the new resource.
You need to create a cost category for the new resource.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: Each correct selection is worth one point.

MB-320 exam questions-q10

QUESTION 11
A company produces lotions for pain relief and uses Dynamics 365 for Finance and Operations. You have been
provided the following information for a new relieving lotion.

MB-320 exam questions-q11

Use the drop-down menus to select the answer choice that completes each statement based on the information
presented in the graphic. NOTE: Each correct selection is worth one point.
Hot Area:

MB-320 exam questions-q11-2

QUESTION 12
A manufacturing company uses advanced warehouse management functionality for a new warehouse.
After releasing a production order, you observe that the warehouse work for raw material picking was not generated.
You need to go through the warehouse management setup to determine what is missing.
What three setup configurations must you validate? Each correct answer presents part of the solution.
NOTE; Each correct selection is worth one point.
A. Work template for raw material picking.
B. Wave template.
C. Directive codes.
D. Confirm the production output location on your resource group.
E. Location directive for raw material picking.
Correct Answer: ACE
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/warehousing/control-warehouselocationdirectives


QUESTION 13
Note: This question is part of series of questions that present the same scenario. Each question in the series contains a
unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
A company produces and distributes seafood to supermarkets. During the manufacturing process, raw seafood is
purchased, cleaned, and packaged into various-sized boxes. Each box may have a different weight.
Product is sold by the box and priced by the pound.
You need to ensure that you can perform transactions at the box level and record the net weight of goods shipped to a
customer.
Solution: Set up the product with a sales unit measure of pounds and inventory unit measure of box. Set a standard unit
conversation for the product from box to pounds.
Does the solution meet the goal?
A. Yes
B. No
Correct Answer: B

Thanks for reading! Hope the newest MB-320 exam dumps can help you in your exam. Get full MB-320 exam questions to try Pass4itSure MB-320 dumps! MB-320 dumps in VCE and PDF are here: https://www.pass4itsure.com/mb-320.html (Updated: Jul 24, 2021).

Download Pass4itSure MB-320 dumps pdf from Google Drive: https://drive.google.com/file/d/1mnXnerozPMvr5G9dC8_pAemihOKNjGHp/view?usp=sharing (MB-320 Exam Questions)