Category: 70-743 exam dumps pdf

[Share free] Most updated Microsoft 70-743 exam dumps with 100% accurate 70-743 exam questions answers

With the complete collection of Microsoft 70-743 exam dumps questions and answers, Pass4itsure has assembled to take you through 70-743 exam dumps questions and answers for your 70-743 exam preparation. Share here for free: Microsoft 70-743 dumps, 70-743 exam questions, 70-743 pdf, 70-743 exam video!

Microsoft MCSA 70-743 exam questions from Youtube

Pass4itsure dumps include everything you need, and it will help you in the best way.

Features:

Pass4itsure Features

You can download and read the latest Microsoft MCSA 70-743 exam dumps in a PDF document. Pass4itsure is providing original questions of 70-743.

Microsoft 70-743 pdf | Latest Microsoft 70-743 google drive

Microsoft 70-743 pdf [free] download from Google Drive:  https://drive.google.com/file/d/1WIqFbeR7UI-Dxx1SEqfAOpXSAKIr5_tN/view?usp=sharing (70-743 study guide pdf latest)

Microsoft MCSA 70-743 practice test free

QUESTION 1
You have multiple servers that run Windows Server 2016 and are configured as VPN servers.
You deploy a server named NPS1 that has Network Policy Server (NPS) installed.
You need to configure NPS1 to accept authentication requests from the VPN servers.
What should you configure on NPS1?
A. From RADIUS Clients and Servers, add a remote RADIUS server group.
B. From Policies, add a connection request policy.
C. From Policies, add a network policy.
D. From RADIUS Clients and Servers, add RADIUS clients.
Correct Answer: D
You can use this topic to configure network access servers as RADIUS Clients in NPS.
When you add a new network access server (VPN server, wireless access point, authenticating switch, or dialup server)
to your network, you must add the server as a RADIUS client in NPS, and then configure the RADIUS client to
communicate with the NPS server.
References:
https://docs.microsoft.com/en-us/windows-server/networking/technologies/nps/nps-radius-clients-configure


QUESTION 2
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named
Server1, Server2, and Server3 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and
have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.
A domain user named User1 is a member of the groups shown in the following table.

70-743 exam questions-q2

On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the
\Global access scope to the user. Which actions can User1 perform? To answer, select the appropriate options in the
answer area.
Hot Area:

70-743 exam questions-q2-2

User1 is using Server Manager, not IPAM to perform the administration. Therefore, only the “DHCP Administrators”
permission on Server2 and the “DHCP Users” permissions on Server3 are applied. The permissions granted through
membership of the “IPAM DHCP Scope Administrator Role” are not applied when the user is not using the IPAM
console.


QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,
while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named
Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.
Contoso.com has the following configuration:

70-743 exam questions-q3

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device
registration.
You need to configure Active Directory to support the planned deployment.
Solution: You raise the forest functional level to Windows Server 2012 R2.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
For a Windows Server 2012 R2 AD FS server, this solution would work. However, new installations of AD FS 2016
require the Active Directory 2016 schema (minimum version 85).
References: https://technet.microsoft.com/en-us/windows-server-docs/identity/ad-fs/operations/configure-device-basedconditional-access-on-premises https://docs.microsoft.com/en-gb/windows-server/identity/ad-fs/overview/ad-fsrequirements

QUESTION 4
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2016.
As a domain administrator, you log on to a server named Server2 and open Windows PowerShell.
You need to establish an interactive PowerShell session to a server named Server1.
Which command should you run?
A. Set-PSSessionConfiguration -AccessMode Remote -Name Server1
B. Enable-PSRemoting Server1
C. New-PSSession -Name Server1
D. Enter-PSSession -ComputerName Server1
Correct Answer: D


QUESTION 5
You have a DirectAccess Server that is accessible by using the name directaccess.fabrikam.com On the DirectAccess
server, you install a new server certificate that has a subject name of directaccess.contoso.com, and then you configure
DNS records for directaccess.contoso.com You need to change the endpoint name for DirectAccess to
directaccess.contoso.com What command should you run? To answer, select the appropriate options in the answer
area.
Hot Area:

70-743 exam questions-q5

QUESTION 6
You have a server named Server1 that runs Windows Server 2016.
You plan to deploy Internet Information Services (US) in a Windows container.
You need to prepare Server1 for the planned deployment.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
to the answer area and arrange them in the correct order.
Select and Place:

70-743 exam questions-q6

 Correct Answer:

70-743 exam questions-q6-2

QUESTION 7
DRAG DROP
On a new server, you install Windows Server 2016, and then you install the Hyper-V server role.
You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of
Windows Server.
Which four commands should you use in sequence? To answer, move the appropriate commands to the answer area
and arrange them in the correct order.
Select and Place:

70-743 exam questions-q7

https://docs.microsoft.com/en-us/virtualization/windowscontainers/quick-start/quick-start-windows-server

QUESTION 8
You have a server named Server1 that runs Windows Server 2016. You install the Hyper-V role on Server1. Server1
has eight network adapters that are dedicated to virtual machines.
The network adapters are Remote Direct Memory Access (RDMA)-enabled.
You plan to use Software Defined Networking (SDN). You will host the virtual machines for multiple tenants on the
Hyper-V host.
You need to ensure that the network connections for the virtual machines are resilient if one or more physical network
adapters fail.
What should you implement?
A. NIC teaming on the Hyper-V host
B. virtual Receive-side Scaling (vRSS)
C. Switch Embedded Teaming (SET)
D. single root I/O virtualization (SR-IOV)
Correct Answer: C

QUESTION 9
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host. You run the commands
shown in the following graphic:

70-743 exam questions-q9

Use the drop-down menus to select the answer choice that completes each statement based on the information
presented in the graphic.
Hot Area:

70-743 exam questions-q9-2

QUESTION 10
You have a server named Server1 that runs Windows Server 2016 and has the File and Storage Services server role
installed.
Server1 has an ReFS-formatted volume named Volume1 that is 512 GB. Volume1 is mounted as C:\App1\temp.
You need to ensure that you can enable deduplication of Volume1.
What should you do?
A. Initialize the physical disk that contains Volume1.
B. Unmount Volume1.
C. Format Volume1.
D. Install a Windows feature.
Correct Answer: D
References: https://docs.microsoft.com/en-us/windows-server/storage/data-deduplication/install-enable#enable-deduplights-on


QUESTION 11
Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based
Distributed File System (DFS) namespace named Namespace1.
You need to view the shares to which users will be redirected when the users attempt to connect to a folder named
Folder1 in the DFS namespace.
What cmdlet should you run? To answer, select the appropriate options in the answer area.
Hot Area:

70-743 exam questions-q11

 Correct Answer:

70-743 exam questions-q11-2

References: https://docs.microsoft.com/en-us/powershell/module/dfsn/get-dfsnfolder?view=win10-ps


QUESTION 12
You have an IP Address Management (IPAM) deployment that is used to manage all of the DNS servers on your
network. IPAM is configured to use Group Policy provisioning.
You discover that a user adds a new mail exchanger (MX) record to one of the DNS zones.
You want to identify which user added the record.
You open Event Catalog on an IPAM server, and you discover that the most recent event occurred yesterday.
You need to ensure that the operational events in the event catalog are never older than one hour.
What should you do?
A. From an IPAM_DNS Group Policy object (GPO), modify the Group Policy refresh interval.
B. From Task Scheduler, create a scheduled task that runs the Update-IpamServer cmdlet.
C. From the properties on the DNS zone, modify the refresh interval.
D. From Task Scheduler, modify the Microsoft\Windows\IPAM\Audit task.
Correct Answer: D

QUESTION 13
This question is part of a series of questions that present the same scenario. Each question in the series contains a
unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while
others
might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: From Windows PowerShell, you run Get-ADDomainController -Discover -Service 2.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B

70-743 exam questions-q13

References:
https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmo-roles/
http://www.markou.me/2016/10/get-list-fsmo-role-holders-using-powershell-one-liners/
https://technet.microsoft.com/en-us/itpro/powershell/windows/addsadministration/getaddomaincontroller?f=255andMSPPError=-2147217396

Practice the answers to the questions and diagnose your strengths and weaknesses. If you are weak in a certain place, go back and research further to make up for your shortcomings.

Reason for selection:

Pass4itsure Reason for selection

Pass4itsure is the best site for Microsoft 70-743 dumps. It is giving you latest questions answer, The question answer are verified by IT experts. After the preparation you can easily pass the exam. 

General tips to crack CMAT 70-743 exam:

  1. The first and the foremost thing to crack any competitive 70-743 exam is to believe in yourself. Based on your strengths boost up your confidence levels.
  2. The only success to achieve the 70-743 exam is practicing a lot and do a quick revision on all the topics which you are well aware of to get a good score. Don’t try to perform experiments by practicing new models.

Latest Pass4itsure Microsoft dumps  discount code 2020

Pass4itsure-discount-code-2020

One last word:

Download your Microsoft 70-743 exam dumps questions now and prepares them with full concentration. Pass4itsure is the industry leader! Select Pass4itsure 70-743 dumps pass 70-743 exam.