MCTS Microsoft

Microsoft 070-158 Exam, Download Microsoft 070-158 Study Guide Book Online Shop

Welcome to download the newest Dumpsoon 1Z0-060 dumps:

ATTENTION : Because Microsoft 070-158 exam has change recently,Flydumps has updated the Microsoft 070-158 exam dumps with all new Microsoft 070-158 exam questions and answers, visit flydumps.com to get free Microsoft 070-158 PDF and VCE dumps.

Question: 9.
Your company network contains Microsoft Identity Lifecycle Manager (ILM) 2007 and Microsoft SQL Server 2008. ILM is configured to use 32-bit rules extensions. You upgrade ILM 2007 to Forefront Identity Manager (FIM) 2010. You need to recompile the rules extensions. What should you do? (Choose all that apply.)
A. Configure the references to point to a custom .dll file.
B. Configure the references to point to the FIM 2010 libraries.
C. Copy the extensions to the server that runs FIM 2010.
D. Copy the extensions to a 64-bit version of SQL Server 2008.

Answer: BC
Question: 10.
Drag and Drop Question
This type of question asks you to complete a diagram in the work area. In a Drag and Drop question,
you need to move sources from the source area into targets in the diagram in the work area. Each
target is indicated by a gray box.
To set your answer
Drag the appropriate source objects to the correct targets in the work area.
When the source object is within the target, an outline appears around the gray box. The source
object will snap into place when you release the mouse button.
Source objects can be moved only to targets that are the same size.
You might not need to use all the source objects provided.

Some source objects can be used only once; some source objects can be used more than once. A
source object will appear deactivated when its use limit is reached. To use this source object again,
remove an instance of it from the work area.
To remove an object from the work area
Drag the source object back to the source area.
Select the source object and press the Delete key.
The object is reactivated in the source area.
To replace a source object in the work area
Drag a new source object to the target.
The new source object will replace the previous source object.
To remove all source objects from the work area
Click the Reset button.
Notes
Note the following considerations when answering this type of question:
You might need to use the scroll bar to view the entire contents of the question. You might need to
use the scroll bar to view the entire contents of the panes in the work area. You can use the splitter
bar to resize the panes. Your company network contains Microsoft Identity Integration Services
(MIIS) 2003 and Microsoft SQL Server 2005 configured as shown in the following table.

Server name Role
LON-SRV1 ?MIIS 2003 SP1 Windows Server 2003
LON-SQL ?SQL Database Server Windows Server 2003
LON-DC1 ?AD Domain Controller Windows Server 2003

You plan to upgrade the network to Forefront Identity Manager (FIM) 2010. You want to separate the FIM Service, FIM Synchronization Service, and FIM Portal roles. You need to identify the appropriate operating system and server roles that must be installed on the existing hardware. What should you do? (To answer, drag the appropriate component or components to the correct location or locations in the answer area.) Installation Component SQL Server 2008 (32-bit) SQL Server 2008 (64-bit) Windows Server 2008 R2 FIM Service FIM Synchronization Service FIM Portal FIM Password Reset Portal Server LON-SRV1 LON-SQL LON-DC1

Answer: I7H6G3F5E2D3C4B2A3
Your company network includes Microsoft Identity Lifecycle Manager (ILM) 2007 and Microsoft SQL Server 2005. You need to perform a platform upgrade from ILM to Forefront Identity Manager (FIM) 2010. You also need to upgrade SQL Server 2005 to SQL Server 2008. What should you do? (Choose all that apply.)
A. Rename the ILM database to FIMSynchronizationManagement.
B. Rename the ILM database to FIMSynchronizationService.
C. Set the compatibility level on the ILM database to SQL Server 2005 (90).
D. Copy the existing ILM database in SQL Server 2005 to a server that runs a 32-bit version of SQL Server 2008.
E. Copy the existing ILM database in SQL Server 2005 to a server that runs a 64-bit version of SQL Server 2008.

Answer: BCE
Question: 12.
Your company network includes Forefront Identity Manager (FIM) 2010 and Active Directory Domain Services (AD DS). AD DS is configured as a single domain. The domain functional level is set to Windows Server 2008. Your company plans to use the FIM Add-in for Microsoft Outlook 2007 feature. You create and edit a Group Policy Object (GPO) for FIM Outlook 2007 settings. The GPO does not contain settings for FIM client configuration. You need to be able to manage FIM client components by using Group Policy. What should you do?
A. Raise the domain functional level to Windows Server 2008 R2.
B. Create the Central Store for Group Policy Administrative Templates on the PDC Emulator.
C. Add the ForefrontIdentityManager.admx file and the regional .adml file to the PolicyDefinitions folder.
D. Update the client registry entries located in HKEY_CURRENT_USER\Software\Policies\Microsoft\Forefront Identity Manager\2010\Add-ins.

Answer: C
You administer a Forefront Identity Management (FIM) 2010 server in your company network. All client computers run Windows 7. Your company plans to automate the deployment of FIM client components. You need to perform an unattended installation of the FIM Password and Authentication extension. What should you do?
A. From a command prompt, run msiexec.exe /i “\\DistributionServer\FIM\Add-ins and extensions.msi” /quiet ADDLOCAL=OfficeClientPORTAL_LOCATION=FIMServer01 PORTAL_PREFIX=https [email protected].
B. From a command prompt, run msiexec.exe /i “\\DistributionServer\FIM\Add-ins and extensions.msi” /quiet ADDLOCAL=PasswordClientRMS_LOCATION=FIMServer01 SITELOCK_DOMAIN=contoso.com;adatum.com.
C. From the Windows PowerShell console, run Get-WMIObject -ComputerName LONCL1 -List | Where-Object -FilterScript {$_.Name -eq “Win32_Product”}).Install(“\\DistributionServer\FIM\Add-ins and extensions.msi”).
D. From the Windows PowerShell console, run Get-Object -ComputerName LONCL1 -List | Where-Object -FilterScript {$_.Name -eq “Win32_Product”}).Install(“\\DistributionServer\FIM\Add-ins and extensions.msi”).

Answer: B
Question: 14.
You administer a Forefront Identity Management (FIM) 2010 server in your company network. You install the FIM Service and Portal Language Pack. A new office is opened in Japan. Employees in the Japan office report that regional settings in only English, Chinese (Simplified), and Chinese (Traditional) are available in the FIM Portal. You need to ensure that regional settings in only English and Japanese are available for the Japan office in the FIM Portal. What should you do?
A. Load a backup of the FIM Service database made prior to the installation of the FIM Service and Portal Language Pack. Rerun the setup for the FIM Service and Portal Language Pack.
B. Load a backup of the FIM Synchronization Service database made prior to the installation of the FIM Service and Portal Language Pack. Rerun the setup for the FIM Service and Portal Language Pack.
C. From the FIM Splash Screen, download and run Setup.exe for the FIM Service and Portal Language Pack.
D. On the Custom Setup page, select the appropriate languages that must be installed.

Answer: A
Your company network includes Forefront Identity Manager (FIM) 2010. You manage the FIM 2010 Add-ins and Extensions through a Group Policy Object (GPO) configured according to the two exhibits. (Click the Exhibit button.)

(Click the Exhibit button.)
You need to configure the GPO policy settings to meet the following requirements: Users must be able to register for Password Reset and Registration. The Approve and Reject buttons must appear in the Microsoft Outlook client and approvals must be performed by using the button. What should you do? (Choose all that apply.)
A. Add fim.adatum.com to the Configure valid ActiveX sites policy setting.
B. Add the group address book to the Configure the address book containing valid groups policy setting.
C. Add the member address book to the Configure the address book containing valid members policy setting.
D. Add the address or addresses of FIM administrators to the Configure valid senders of approval requests policy setting.
E. Add the address or addresses of mailboxes that host the FIM web service to the Configure valid senders of approval requests policy setting.

Answer: AE
Question: 16.
Your company network includes Forefront Identity Manager (FIM) 2010. You configure the FIM Portal to use detailed error pages. A backup of FIM is performed daily. After a restore of the FIM Service, you discover that the detailed error pages are not displayed for the FIM Portal. You need to ensure that when you perform a restore of the FIM Service, the detailed error pages are displayed. What should you do?
A. Include the web.config file in the daily backup of FIM.
B. From an elevated command prompt, run iisreset.exe.
C. From the FIM Portal, edit the Portal Configuration Extended Attributes page.
D. Edit the web.config file and include <customErrors mode=”On”/> in the file.

Answer: A
Question: 17.
Build List and Reorder Question This type of question asks you to indicate the correct answer by building an answer list. In a Build List and Reorder question you need to build a list by dragging the appropriate source objects to the answer list, and then place them in the correct order based on criteria defined in the question. To set your answer Drag the source object from the source area to the answer list. The source object is removed from the source area and is added to the answer list relative to the cursor location.
Click the source object to select it, and then click the button.
The source object is removed from the source area and is added to the bottom of the answer list.
The button is unavailable after all source objects are moved to the answer list.
To reorder objects in the answer list
Drag the object to the correct location in the answer list.

Click an object to select it, and then click the and buttons to move the object.

The and buttons might be unavailable based on the location of the currently selected
object.
To remove an object from the answer list
Drag the object from the answer list to the source are

a.
The object is returned to the source area.
Select the object, and then press the Delete key.
The object is returned to the source area.
Click the object to select it, and then click the button.
The object is returned to the source area. The button is unavailable until the first source object
is added to the answer list.
To remove all objects from the answer list
Click the Reset button.
Notes

Note the following considerations when answering this type of question:
You
might need to use the scroll bar to view the entire contents of the question.
You might need to use the scroll bar to view the entire contents of the panes in the work area.
You can use the splitter bars to resize the panes. Your company network includes Forefront Identity
Manager (FIM) 2010 and Microsoft SQL Server 2008. A backup of the FIM Synchronization Service is
performed daily.
The FIM Synchronization Service fails. You restore the FIM 2010 database to the SQL server.
You need to restore the FIM Synchronization Service.
What should you do? (To answer, move the appropriate actions from the list of actions to the
answer area and arrange them in the correct order.)

A. Stop the FIM Service.
B. Stop the FIM Synchronization Service.
C. Start the FIM Synchronization Service.
D. Provide the encryption keys that were exported during the backup process.
E. Install the FIM 2010 Synchronization Service on a new computer in the same Active Directory domain.

Answer: E BEFORE D)(D BEFORE C
You administer a Forefront Identity Management (FIM) 2010 server in your company network. The server that runs the FIM Portal fails. You begin the restore process. However, you receive an error when you stop the SQL Server Agent service. You need to be able to continue the restore process. What should you do?
A. Run iisreset.exe.
B. Close the FIM Portal.
C. Stop the FIM Synchronization service.
D. Ensure that no stored procedure runs in FIM.

Answer: D
Question: 19.
You administer a Forefront Identity Management (FIM) 2010 server in your company network. You need to configure a regular backup of the FIM Synchronization Service while minimizing interruption to the service if possible. What should you do?
A. Include the FIM Service database along with the backup.
B. Stop the FIM Synchronization Service before performing the backup.
C. Ensure that all management agents are running during the backup process.
D. Export the FIM Synchronization Service encryption key during the backup process.

Answer: D
Question: 20.
You administer a Forefront Identity Management (FIM) 2010 server in your company network. You want to provision new users to Active Directory Domain Services (AD DS). You need to calculate a random password for newly created user accounts. You also need to be able to send the password in an automatic e-mail notification. What should you do?
A. Calculate the password by using a workflow. Link an outbound synchronization rule parameter to a workflow parameter.
B. Calculate the password in an outbound synchronization rule. Create a workflow to send a notification e-mail.
C. Calculate the password by using a workflow. Configure another workflow to send a notification e-mail.
D. Calculate the password in an outbound synchronization rule. Link an outbound synchronization rule parameter to a workflow parameter.

Answer: A
Question: 21.
You administer a Forefront Identity Manager (FIM) 2010 server in your company network. You create a new Active Directory Domain Services (AD DS) Management Agent. You also create the AD DS user synchronization configuration triple. You need to synchronize FIM user accounts with AD DS. What should you do?
A. Select the Password Synchronization option.
B. Select the Enable Synchronization Rule Provisioning option.
C. Enable user management Management Policy Rules.
D. Select the Enable metaverse rules extension and Enable Provisioning Rules Extension options.

Answer: B
Question: 22.
You administer a Forefront Identity Manager (FIM) 2010 server. The FIM server has management agents (MAs) connected to the following data sources: Active Directory Domain Services (AD DS) Active Directory Lightweight Directory Services (AD LDS) Microsoft SQL Server. You need to delete a user object from AD LDS when the matching user record in the SQL Server database is marked as inactive. The attribute flow between the user record in the SQL Server and the matching AD DS user object must remain unchanged. What should you do? (Each correct answer presents part of the solution. Choose all that apply.)
A. Configure connector filter for the AD DS MA.
B. Configure connector filter for the SQL Server MA.
C. Configure deprovisioning for the AD LDS MA.
D. Configure deprovisioning in the AD LDS triple.
E. Configure deprovisioning for the SQL Server MA.
F. Configure object deletion rule for the Person object type.

Answer: CD
You administer a Forefront Identity Manager (FIM) 2010 server in your company network. The FIM server synchronizes user resources between an Active Directory Domain Services (AD DS) domain and a Human Resources (HR) application. HR data has been projected to the metaverse and accounts are provisioned to the domain immediately after user records are created in the HR application. The displayName attribute of the domain user matches the Name attribute of the HR
application s user record. You need to find out whether a user account has been successfully
created in the domain after you add a new record in the HR application. What should you do? (Each correct answer presents part of the solution. Choose all that apply.)
A. Create an inbound synchronization rule.
B. Create an outbound synchronization rule.
C. On the Active Directory outbound sync rule, add the outbound attribute flow rule Source: Name; Destination: displayName. Check the box “use as existence test.”
D. On the Active Directory outbound sync rule, add the outbound attribute flow rule Source: Name; Destination: displayName. Check the box “initial flow only.”
E. Select the Use as Existence Test check box for the displayName attribute.

Answer: BCE
Question: 24.
You administer a Forefront Identity Management (FIM) 2010 server in your company network. You need to use the FIM Portal to create a group that meets the following requirements: The group is e-
mail enabled. Manager approval is required to join. What should you do?
A. Create a distribution group that is the Manual group membership type.
B. Create a security group that is the Manager-based group membership type.
C. Create a security group that is the Criteria-based group membership type.
D. Create a distribution group that is the Manager-based group membership type.

Answer: A
You administer a Forefront Identity Manager (FIM) 2010 server in your company network. You need to create a new group that automatically includes users who report to either of two managers. Which type of group should you create?
A. Manager-based security group
B. Manager-based distribution group
C. Manually managed security group
D. Criteria-based distribution group

Answer: D
Question: 26.
You deploy Forefront Identity Manager (FIM) 2010 server in your company network. You configure group objects synchronization between the Active Directory domain and FIM Portal. You create an outbound synchronization rule for the domain data source. You need to configure the outbound attribute flow for the group object. You also need to ensure that the attribute flow supports all possible Active Directory group types and scopes. What should you do? (Choose all that apply.)
A. Configure a custom expression for the groupType destination attribute.
B. Configure a custom expression for the dn destination attribute.
C. Configure mapping of the type source attribute to the groupType destination attribute.
D. Configure mapping of the scope source attribute to the groupType destination attribute.
E. Configure mapping of the dn source attribute to the dn destination attribute.
F. Configure mapping of the member source attribute to the member destination attribute.

Answer: ABF
Question: 27.
You install a Forefront Identity Management (FIM) 2010 server in your company network. The network includes Active Directory Domain Services (AD DS) and a Human Resources (HR) application. User account attributes are located in AD DS and in the HR application. You configure FIM to import a Department attribute from both the HR application data source and AD DS. You need to ensure that the value for the Department attribute from HR is always used where a value exists. What should you do?
A. From Synchronization Service Manager, use Metaverse Designer to configure the Department attribute flow precedence for the Person object.
B. From Synchronization Service Manager, use Management Agents to modify join rules precedence in the HR application MA and in the AD DS MA.
C. From the FIM Portal, create a new outbound synchronization rule for the HR application data source.
D. From the FIM Portal, create a new outbound synchronization rule for the AD DS data source.

Answer: A
Question: 28.
You install a Forefront Identity Management (FIM) 2010 server in your company network. The network has a Human Resources (HR) application that contains the following two employee attributes: First Name Last Name You create a Management Agent (MA) by using the HR application as a data source. You need to calculate the emailAddress attribute of the metaverse Person object. You also need to ensure that the attribute concatenates the values of the First Name and the Last Name attributes. What should you do?
A. Create a synchronization rule. Add an Inbound attribute flow.
B. Create a synchronization rule. Add an Outbound attribute flow.
C. Edit the Management Agent properties. Configure an Import attribute flow based on the Direct mapping type.
D. Edit the Management Agent properties. Configure an Export attribute flow based on the Advanced mapping type.

Answer: A
Question: 29.
You deploy a Forefront Identity Manager (FIM) 2010 server in your company network. You create bidirectional synchronization rules for an Active Directory Domain Services (AD DS) data source and a Microsoft SQL Server data source. Both synchronization rules have the same input and output attribute flows and an equal precedence. You need to prevent the department attribute defined in the AD DS to flow into the SQL Server data source. You also need to ensure that all other attributes retain an equal precedence flow. What should you do? (Each correct answer presents part of the solution. Choose all that apply.)

If you prepare for the Microsoft 070-158 exam using our FLYDUMPS Microsoft 070-158 practice test, we guarantee your success in the first attempt. FLYDUMPS fully loaded questions and Microsoft 070-158 real exam are the absolute perfect and preferred method of preparing for the Microsoft 070-158 exams by thousands of successful certified professionals across the globe. The answers in the FLYDUMPS Microsoft 070-158 practice test are written in detail to explain each and every point and completely answers that can come in your final exam. All you will need to do is send us proof of your failing grade, and fill out a special form that we will give you.

Welcome to download the newest Dumpsoon 1Z0-060 dumps: https://www.pass4itsure.com/1z0-060.html

http://www.ducktown.org/computer-associates-270-420-demo-free-download-prompt-updates-computer-associates-270-420-pdf-guaranteed-success/