Category: MCSE2003 Messaging

Microsoft 070-342 Demo, Latest Upload Microsoft 070-342 Test Software On Our Store

Are you struggling for the Microsoft 070-342 exam? Good news,Flydumps IT technical experts have collected and certified 445 questions and answers which are updated to cover the knowledge points and enhance candidates’abilities.With Microsoft 070-342 preparation tests you can pass the exam easily and go further on Microsoft career path.

QUESTION 1
You are evaluating the deployment of two additional Client Access servers and a hardware load balancer in the London office.
You need to recommend changes to the Client Access namespace design to meet the site resiliency requirements.
Which three actions should you recommend? (Each correct answer presents part of the solution.
Choose three.)
A. In the London office, set mail.proseware.com as the external host name for Outlook Anywhere. In the New York office, set mail.proseware.com as the external host name for Outlook Anywhere.
B. In the London office, set lonmail.proseware.com as the internal host name for Outlook Anywhere. In the New York office, set nycmail.proseware.com as the internal host name for Outlook Anywhere.
C. Use DNS round robin for the external host name for Outlook Anywhere.
D. Use DNS round robin for the internal host name for Outlook Anywhere.
E. In the London office, set nycmail.proseware.com as the external host name for Outlook Anywhere. In the New York office, set lonmail.proseware.com as the external host name for Outlook Anywhere.
F. In the London office, set mail.proseware.com as the internal host name for Outlook Anywhere. In the New York office, set mail.proseware.com as the internal host name for Outlook Anywhere.
Correct Answer: ABC Explanation
Explanation/Reference:
A: Use mail.proseware.com as the external host name for Outlook Anywhere at both locations.

B: Use internal names (lonmail.proseware.com and nycmail.proseware.com) as the internal host name for
Outlook Anywhere in London and New York respectively.

C: To meet the resiliency requirement use the external host name (mail.proseware.com) for DNS round
robin for Outlook anywhere.

* From scenario:
/ Users connect to mail.proseware.com for Microsoft Outlook and Outlook Web App services.
Mail.proseware.com resolves to an IP address on a hardware load balancer.

/ All Outlook Anywhere users are enabled for Cached Exchange Mode.
/ Proseware has two main offices located in New York and London.
/ Site Resiliency Requirements
-All mailboxes must be available if a single site becomes unavailable. The solution must not require
administrator intervention.

-User traffic on the WAN links must be minimized.

* Split DNS for Exchange Server 2013
Split DNS allows your internal clients to receive a different answer to their DNS lookups than an external
client would receive. In effect you have your Exchange namespace hosted on your internal DNS server,
with records configured to point to internal IP addresses.

QUESTION 2
You need to recommend a solution to meet the technical requirements for redundancy during email delivery.
Which cmdlet should you include in the recommendation?
A. Set-FrontendTransportService
B. Set-TransportConfig
C. Set-MailboxTransportService
D. Set-TransportService
Correct Answer: B Explanation
Explanation/Reference:
Explanation:
/ Internal email messages must be rejected if the messages cannot be protected by using Shadow

Redundancy
We need to use the Set-TransportConfig cmdlet with the RejectMessageOnShadowFailure parameter.
QUESTION 3
You need to resolve the content filtering issue for the Office 365 pilot users.
What should you do?
A. Run the Set-Mailbox cmdlet and specify the -MaxBlockedSenders and the -MicrosoftOnlineServicesID parameters.
B. Run the Microsoft Online Services Directory Synchronization Configuration Wizard and select Enable Exchange hybrid deployment.
C. Modify the default content filter policy from the Office 365 portal.
D. Run the Set-Mailbox cmdlet and specify the -MaxSafeSenders and the -MicrosoftOnlineServicesID parameters.
Correct Answer: B Explanation
Explanation/Reference:
*
Scenario:
/ The pilot users report that entries added to their Safe Senders list and their Blocked Senders list fail to
work.
/ For the pilot mailboxes, all inbound email messages from the Internet are delivered to the Exchange
Server organization, and then forwarded to Office 365.
*
Hybrid Configuration wizard Exchange 2013 includes the Hybrid Configuration wizard which provides you
with a streamlined process to configure a hybrid deployment between on- premises Exchange and
Exchange Online organizations.

Reference: Exchange Server 2013 Hybrid Deployments
QUESTION 4
You discover that the Large Audience MailTip is not displayed when users compose an email message to the 20 new distribution groups.
You need to ensure that the Large Audience MailTip is displayed for the new distribution groups immediately.
Which cmdlet should you use?
A. Set-DistributionGroup
B. Set-MailboxServer
C. Set-ClientAccessServer
D. Start-ManagedFolderAssistant
Correct Answer: B Explanation
Explanation/Reference:
We need to use the Set-MailboxServer cmdlet with the ForceGroupMetricsGeneration parameter to force a count of the number of members of the distribution groups.
The ForceGroupMetricsGeneration parameter specifies that group metrics information must be generated on the Mailbox server regardless of whether that server generates an offline address book (OAB). By default, group metrics are generated only on servers that generate OABs. Group metrics information is used by MailTips to inform senders about how many recipients their messages will be sent to. You need to use this parameter if your organization doesn’t generate OABs and you want the group metrics data to be available.
QUESTION 5
You need to resolve the network traffic issue for MapiNet.
You suspend database replication.
Which three cmdlets should you run next in sequence? (To answer, move the appropriate three
cmdlets from the list of actions to the answer area and arrange them in the correct order.)

Select and Place:

Correct Answer:

Explanation
Explanation/Reference:
QUESTION 6
You are preparing the environment for the planned retention solution.
You need to identify which policy tags must be created to meet the retention requirements.
Which policy tag types should you identify? (To answer, drag the appropriate policy tag types to

the correct message types. Each policy tag tag may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Select and Place:

Correct Answer:

Explanation
Explanation/Reference:
QUESTION 7
You need to implement UM for the sales department users.
Which four commands should you run in sequence? (To answer, move the appropriate four
commands from the list of commands to the answer area and arrange them in the correct order.)

Select and Place:

Correct Answer:

Explanation
Explanation/Reference:
QUESTION 8
You need to recommend which technology can be used to meet each email security requirement. What should you recommend? (To answer, select the appropriate technology for each requirement in the answer area.)

Hot Area:

Correct Answer:

Explanation
Explanation/Reference:
QUESTION 9
You need to recommend a solution to support the planned changes for the integration of the Exchange Server organizations of Contoso and Proseware. What should you configure in each organization? (To answer, drag the appropriate objects to the correct forests. Each object may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Select and Place:

Correct Answer: Explanation

Explanation/Reference:
QUESTION 10
You need to recommend a solution to audit the issue of User1.
Which command should you recommend? (To answer, select the appropriate options in the
answer area.)
Hot Area:

Correct Answer: Explanation

Explanation/Reference:
*
Scenario: A user named User1 reports that email messages are being sent from her mailbox without
her consent.
*
Set-Mailbox –AuditDelegate
The AuditDelegate parameter specifies the operations to log for delegate users.

Testlet 1

Topic 6, Mix Questions
QUESTION 1
You plan to deploy 20 Client Access servers that will have Exchange Server 2013 installed.
You need to prepare the certificate required for the planned deployment. The solution must ensure that the same certificate can be used on all of the Client Access servers.
What should you do first?
A. On one of the Client Access servers, run the New-ExchangeCertificate cmdlet and specify the privatekeyexportable parameter.
B. On all of the Client Access servers, run the Get-ExchangeCertificate cmdlet.
C. On one of the Client Access servers, run the New-ExchangeCertificate cmdlet and specify the binaryencoded parameter.
D. On one of the Client Access servers, start the Certificates console and run the Certificate Import Wizard.
Correct Answer: A Explanation
Explanation/Reference:
We need to create a new certificate. We make it exportable.

Note:
Use the New-ExchangeCertificate cmdlet to create a self-signed certificate, renew an existing self-signed
certificate, or generate a new certificate request for obtaining a certificate from a certification authority
(CA).

QUESTION 2
Contoso, Ltd., and Fabrikam, Inc., are partner companies.
Each company has an Exchange Server 2013 organization in a data center that is connected to the Internet. All of the Exchange servers in both of the organizations have the Client Access server role and the Mailbox role installed.
The data centers connect to each other by using a redundant high-speed WAN link.
The following mail exchanger (MX) records are configured:
*
Contoso.com MX 10 mail.contoso.com

*
Fabrikam.com MX 10 mail.fabrikam.com
You need to recommend a solution for inbound mail flow.
The solution must meet the following requirements:
*
Users in both companies must receive email from the Internet if either of the Internet links fails.

*
Mail from the Internet to contoso.com must be received by mail.contoso.com if the Internet link at the Contoso data center is available.

*
Mail from the Internet to fabrikam.com must be received by mail.fabrikam.com if the Internet link at the Fabrikam data center is available.
Which two actions should you recommend? (Each correct answer presents part of the solution. Choose two.)
A. Create the following DNS records:
*
Contoso.com MX 20 mail.fabrikam.com

*
Fabrikam.com MX 20 mail.contoso.com
B. Create the following DNS records:
*
Contoso.com MX 10 mail.fabrikam.com

*
Fabrikam.com MX 10 mail.contoso.com
C. For each organization, configure an internal relay domain and a Send connector.
D. For each organization, configure an external relay domain and a Receive connector.
E. Create the following DNS records:
*
Contoso.com MX 5 mail.fabrikam.com

*
Fabrikam.com MX 5 mail.contoso.com
Correct Answer: AC Explanation
Explanation/Reference:
A: Use a priority above 10.

D:
“Each company has an Exchange Server 2013 organization”. We therefore need to configure an External
relay. An Internal relay would be used if the two SMTP domains were in the same Exchange organization.
We also need to configure a Receive connector in each organization to allow the organization to receive
email destined for the other organization.

QUESTION 3
You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table.

EX1 and EX2 are members of a database availability group (DAG) named DAG1. You have a database
named DB1 that replicates to EX1 and EX2.
EX1 fails.
You discover that DB1 does not mount on EX2.
You view the status of the mailbox databases as shown in the following table.
You need to ensure that the database attempts to mount on EX2 if EX1 fails. What should you change?
A. The AutoDatabaseMountDial setting to Lossless
B. The AutoDatabaseMountDial setting to BestAvailabilty
C. The activation preference of DB1\EX2
D. The activation preference of DB1\EX1 Correct Answer: B
Explanation Explanation/Reference:
*
The MailboxServer.AutoDatabaseMountDial property gets or sets the automatic database mount behavior for an Exchange server that is running the Mailbox server role in a continuous replication environment after a database failover.

*
The AutoDatabaseMountDial property specifies the automatic database mount behavior of a Mailbox

server after a failover. Each behavior is based on the copy queue length, or the number of logs that are recognized by the passive copy that need to be replicated. If the copy queue length is greater than the value specified for the behavior, the database does not automatically mount. If the copy queue length is less than or equal to the value specified for the behavior, the Mailbox server tries to copy the remaining logs to the passive copy and mounts the database.

*
BestAvailability The database automatically mounts immediately after a failover if the queue length is less than or equal to
12.
Incorrect: Not A: Lossless The database does not automatically mount until all logs generated on the active device are copied to the passive device
QUESTION 4
Your company has a data center in New York and a data center in Miami. The company has an Exchange Server 2013 organization that contains a database availability group (DAG). The DAG contains servers in both data centers.
The company plans to deploy Outlook Anywhere to all users.
You configure the following:

All of the Exchange Server 2013 virtual directories in the New York data center use a host name of
mail.contoso.com.
All of the Exchange Server 2013 virtual directories in the Miami data center use a host name of
miami.mail.contoso.com.
In each data center, a certificate from an enterprise certification authority (CA) is configured to contain the following:

o A certificate principal name of mail.contoso.com

o Subject alternate names of mail.contoso.com and
miami.mail.contoso.com
You need to recommend which task must be performed to meet the following requirements:
Users always must attempt to connect first to a server in the data center where their mailbox is located.

Users must be able to access their mailbox if a single data center fails.
What should you recommend?
A. Change the external host name of the Miami data center to mail.contoso.com.
B. Modify the ExternalUrl of the Autodiscover virtual directory of the Client Access servers.
C. Run the Set-OutlookProvider cmdlet.
D. Run the Add-AvailabilityAddressSpace cmdlet.
Correct Answer: B Explanation
Explanation/Reference:
*
The Set-OutlookProvider cmdlet creates the global settings for the Autodiscover service. It sets the AutoDiscoverConfig object under the Global Settings object in Active Directory and sets the attributes specified in the parameters listed in the Parameters section.

*
The AutoDiscover feature in Exchange 2007/2010 is often overlooked during setup but is an important factor in ensuring smooth day to day running of your Exchange environment. Its main function is to provide the mail client with all the configuration options it needs, from only the user’s email address and password. This is particularly useful for remote users and smartphone users, who no longer have to enter advanced settings like server names and domains. It is also vital for the correct functioning of features such as Out Of Office and the Offline Address Book in Outlook.
QUESTION 5
Your company has offices in Tokyo, Bangkok, and Shanghai.
All connections to the Internet are routed through an Internet connection in the Tokyo office. All of the

Flydumps.com provides you with the most reliable practice exams to master Microsoft 070-342 Certification. Our Microsoft questions and answers are certified by the senior lecturer and experienced technical experts in the Microsoft field. These test questions provide you with the experience of taking the Microsoft 070-342 actual test.

Microsoft 070-342 Demo, Latest Upload Microsoft 070-342 Test Software On Our Store